Hi to all, I would appreciate any help! Today the pool was lost. I have 3x wd red drives on freenas. Some days ago I saw a degraded message on the dashboard and I wrote down the serial number of that drive. I then changed My PSU and all the cables and the message went away after I restarted. I...

I ran past my freenas box 15 minutes ago and saw a number of messages on the console. Great. I logged into the web interface and found this error: The volume tank1 state is DEGRADED: One or more devices are faulted in response to persistent errors. Checking the pool status shows this: No...

I get this in a pop up window.. [MiddlewareError: Volume could not be imported: 2 devices failed to decrypt] Error: Traceback (most recent call last): File "/usr/local/lib/python3.6/site-packages/tastypie/resources.py", line 219, in wrapper response = callback(request, *args, **kwargs)...

hi, i have been reading through past forum posts about the HPE Microserver Gen10 and after some initial problems people seemed to have success installing FreeNAS. i bought one and now i'm stuck at installation. hardware: HPE Gen10 3216 8GB RAM. BIOS version from august 2018, this is...

Hi, I've got a question about SLOG. I'm not sure if it has to be redundant. What I've read so far says, that it does not need to be redundant because if device fails, the ZIL just goes to the pool where it would be without SLOG anyways. OK, but I never had a completely failing SSD so far. If I...

Hello, I just installed FreeNAS at a new machine and i'm trying to do some basic settings. Although I did all the steps to connect it with my Active Directory and get the users, I realized that it's not working properly. I chose my DNS and my gateway but I have no network. Of course, when I...

Hello Everyone, I am the Systems Administrator here for a medium sized manufacturing company. We currently have 2 FreeNAS 2U certified systems in different physical locations to protect against disaster scenarios. Both systems host 2 ZVols over iSCSI to 1 VM Host each. Lets call these sites...

Hello, Is there a stat or measurement you can refer to in FreeNas that will tell you your drives health? I'm swapping drives out of my RAID Z3 10 drive pool for larger ones and noticed my most recent resilver took much longer than usual. ( ~ 50MB/s I usually see about double during my...

Hello, This is my first time posting on the forum, and if any help could be provided that would be great. I am not experienced in FreeNas, and after following a few guides, I was able to get a working NAS. Recently, I removed a old drive from a Windows machine, and I decided to attempt to add...

I've got a five-disk RAID Z2 array made up of WD Gold 10 TB disks that I've had running for about half a year under FreeNAS-11.1-U5. I noticed a while ago that not one of these disks has ever successfully completed a single SMART test. It doesn't matter if I run the tests under load or right...

I had a freenas 9.3 system running with 8 drives for a couple of years with no problems. A few months ago, needed more space and the supermicro chassis I had was maxed out at 8 drives, so bought a supermicro 24 slot setup. I backed up my freenas install, installed a fresh 11.1 and put into the...

Sometimes when writing things to disk, such as copying between locations in the ZFS volume, or moving items across the network, starting a new disk write, such as saving a new file, will interrupt other processes either locally or remotely that are also writing files, causing them to fail. If I...

hey, Yesterday i added a drive and a new volume to my server and it booted up fine while i was working on it last night doing a configuration on an openvpn jail it rebooted for no reason instead of waiting for it to reboot I went to bed and woke up this morning to this message. "This is a...

I have an IBM M1115 that I got off ebay, flashed to a LSI 9211-8i that has been working well for over a year now, but recently may have started having problems. I've been in the process of moving so my server has been off for quite some time. I started it up today with hopes of getting it up and...

This is my setup: I have a boot pool containing 2 drives which are mirrored. One usb drive and one SSD. I bought 3 usb drives since I have heard that they often fail which already happend 2 times. I just replaced them and eveything worked again. Not this time. This is what happened. One drive...

Hey team, Recently I have been getting a red alert on da1 drive. I do have a replacement drive but I am scared to swap the drive out since I am only raidz1 (media server) and I have heard some horror stories. Below is my smartctrl -a output and a snip it from my daily security email. ===...

My current configuration is as follows: FreeNAS is on 2 mirrored USB-Sticks, the jails are on mirrored SSDs and Transmission uses the main pool for torrent downloads. The problem with this setup is fragmentation and consequently reduced performance of the main pool, which i would like to...