zerowalker
Cadet
- Joined
- May 19, 2019
- Messages
- 9
I have installed TrueNAS on a DL380 Gen9 with a p440ar in HBA mode with 8 2.4tb HDDs and the OS on a 128gb sandisk USB,
and then later added another which to the boot pool which hopefully acts as a redundancy.
Is this a valid setup?
I wanted to have the OS on a separate disk,
but as the 8 disks slots are taken and i couldn't figure out if there is any additional ports that can be used for a drive i had to go the usb route.
The purpose is to store backup copies from Veeam, and as they are already compressed i disabled compression on the storage pool.
and then later added another which to the boot pool which hopefully acts as a redundancy.
Is this a valid setup?
I wanted to have the OS on a separate disk,
but as the 8 disks slots are taken and i couldn't figure out if there is any additional ports that can be used for a drive i had to go the usb route.
The purpose is to store backup copies from Veeam, and as they are already compressed i disabled compression on the storage pool.