Hi guys,
I'm new to Freenas.
I had a pool with 2 HDD, and one of them has many failures with the SATA BUS. (HDD2)
I have buy a third disk to replace the faulty, make the replace through the pool status (GUI). But now the Pool have 3 devices the 1st HDD and the 2&3 in replacing move. I cannot send the HDD2 to Offline or any other mode .
when I'm disconnecting the 2HDD the Pool is always DEGRADED (missing the HDD2). I have all my data to the remain HDD 1&3, how can remove the HDD2 from the Pool and have a healthy Pool. (detach not working also)
below a print out:
#####################################################################################
ast login: Sat Nov 28 11:52:04 on pts/1
FreeBSD 11.3-RELEASE-p14 (FreeNAS.amd64) #0 r325575+c936002dbe2(HEAD): Mon Sep 28 10:46:56 EDT 2020
FreeNAS (c) 2009-2020, The FreeNAS Development Team
All rights reserved.
FreeNAS is released under the modified BSD license.
For more information, documentation, help or support, go here:
http://freenas.org
Welcome to FreeNAS
Warning: settings changed through the CLI are not written to
the configuration database and will be reset on reboot.
root@freenas[~]# zpool status -v
pool: Pool1
state: DEGRADED
status: One or more devices has experienced an error resulting in data
corruption. Applications may be affected.
action: Restore the file in question if possible. Otherwise restore the
entire pool from backup.
see: http://illumos.org/msg/ZFS-8000-8A
scan: resilvered 0 in 0 days 01:39:22 with 2 errors on Sat Nov 28 13:39:05 2020
config:
NAME STATE READ WRITE CKSUM
Pool1 DEGRADED 5 0 0
gptid/54ac3f0e-808a-11ea-8ec2-001e8cd570a8 ONLINE 0 0 0
replacing-1 DEGRADED 10 0 0
2648282656417847195 UNAVAIL 0 0 0 was /dev/gptid/54f031f1-808a-11ea-8ec2-001e8cd570a8
gptid/66f77ff8-2c8f-11eb-9b39-001e8cd570a8 ONLINE 0 010
errors: Permanent errors have been detected in the following files:
/var/db/system/syslog-8f51756b761f415c89e94b71aae947bd/log/middlewared.log
/var/db/system/syslog-8f51756b761f415c89e94b71aae947bd/log/messages
pool: freenas-boot
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
freenas-boot ONLINE 0 0 0
ada0p2 ONLINE 0 0 0
errors: No known data errors
root@freenas[~]# zpool clear Pool1 2648282656417847195
root@freenas[~]# zpool status -v
pool: Pool1
state: DEGRADED
status: One or more devices has experienced an error resulting in data
corruption. Applications may be affected.
action: Restore the file in question if possible. Otherwise restore the
entire pool from backup.
see: http://illumos.org/msg/ZFS-8000-8A
scan: resilvered 0 in 0 days 01:39:22 with 2 errors on Sat Nov 28 13:39:05 2020
config:
NAME STATE READ WRITE CKSUM
Pool1 DEGRADED 5 0 0
gptid/54ac3f0e-808a-11ea-8ec2-001e8cd570a8 ONLINE 0 0 0
replacing-1 DEGRADED 10 0 0
2648282656417847195 UNAVAIL 0 0 0 was /dev/gptid/54f031f1-808a-11ea-8ec2-001e8cd570a8
gptid/66f77ff8-2c8f-11eb-9b39-001e8cd570a8 ONLINE 0 010
errors: Permanent errors have been detected in the following files:
/var/db/system/syslog-8f51756b761f415c89e94b71aae947bd/log/middlewared.log
/var/db/system/syslog-8f51756b761f415c89e94b71aae947bd/log/messages
pool: freenas-boot
state: ONLINE
scan: none requested
config:
################################################################################################
also update to Truenas always is crushing when is importing the disks.
Thanks
I'm new to Freenas.
I had a pool with 2 HDD, and one of them has many failures with the SATA BUS. (HDD2)
I have buy a third disk to replace the faulty, make the replace through the pool status (GUI). But now the Pool have 3 devices the 1st HDD and the 2&3 in replacing move. I cannot send the HDD2 to Offline or any other mode .
when I'm disconnecting the 2HDD the Pool is always DEGRADED (missing the HDD2). I have all my data to the remain HDD 1&3, how can remove the HDD2 from the Pool and have a healthy Pool. (detach not working also)
below a print out:
#####################################################################################
ast login: Sat Nov 28 11:52:04 on pts/1
FreeBSD 11.3-RELEASE-p14 (FreeNAS.amd64) #0 r325575+c936002dbe2(HEAD): Mon Sep 28 10:46:56 EDT 2020
FreeNAS (c) 2009-2020, The FreeNAS Development Team
All rights reserved.
FreeNAS is released under the modified BSD license.
For more information, documentation, help or support, go here:
http://freenas.org
Welcome to FreeNAS
Warning: settings changed through the CLI are not written to
the configuration database and will be reset on reboot.
root@freenas[~]# zpool status -v
pool: Pool1
state: DEGRADED
status: One or more devices has experienced an error resulting in data
corruption. Applications may be affected.
action: Restore the file in question if possible. Otherwise restore the
entire pool from backup.
see: http://illumos.org/msg/ZFS-8000-8A
scan: resilvered 0 in 0 days 01:39:22 with 2 errors on Sat Nov 28 13:39:05 2020
config:
NAME STATE READ WRITE CKSUM
Pool1 DEGRADED 5 0 0
gptid/54ac3f0e-808a-11ea-8ec2-001e8cd570a8 ONLINE 0 0 0
replacing-1 DEGRADED 10 0 0
2648282656417847195 UNAVAIL 0 0 0 was /dev/gptid/54f031f1-808a-11ea-8ec2-001e8cd570a8
gptid/66f77ff8-2c8f-11eb-9b39-001e8cd570a8 ONLINE 0 010
errors: Permanent errors have been detected in the following files:
/var/db/system/syslog-8f51756b761f415c89e94b71aae947bd/log/middlewared.log
/var/db/system/syslog-8f51756b761f415c89e94b71aae947bd/log/messages
pool: freenas-boot
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
freenas-boot ONLINE 0 0 0
ada0p2 ONLINE 0 0 0
errors: No known data errors
root@freenas[~]# zpool clear Pool1 2648282656417847195
root@freenas[~]# zpool status -v
pool: Pool1
state: DEGRADED
status: One or more devices has experienced an error resulting in data
corruption. Applications may be affected.
action: Restore the file in question if possible. Otherwise restore the
entire pool from backup.
see: http://illumos.org/msg/ZFS-8000-8A
scan: resilvered 0 in 0 days 01:39:22 with 2 errors on Sat Nov 28 13:39:05 2020
config:
NAME STATE READ WRITE CKSUM
Pool1 DEGRADED 5 0 0
gptid/54ac3f0e-808a-11ea-8ec2-001e8cd570a8 ONLINE 0 0 0
replacing-1 DEGRADED 10 0 0
2648282656417847195 UNAVAIL 0 0 0 was /dev/gptid/54f031f1-808a-11ea-8ec2-001e8cd570a8
gptid/66f77ff8-2c8f-11eb-9b39-001e8cd570a8 ONLINE 0 010
errors: Permanent errors have been detected in the following files:
/var/db/system/syslog-8f51756b761f415c89e94b71aae947bd/log/middlewared.log
/var/db/system/syslog-8f51756b761f415c89e94b71aae947bd/log/messages
pool: freenas-boot
state: ONLINE
scan: none requested
config:
################################################################################################
also update to Truenas always is crushing when is importing the disks.
Thanks