- Joined
- Dec 11, 2015
- Messages
- 1,410
hi,
Some digging produced perhaps an additional piece of the puzzle towards better control.
I was looking to very the raw command line that was valid for the X9/x10 boards, to an X11. So far no definitive success.
Yet I found that when running
The sensor ID is also displayed with its raw reference value (at least it looks so).
Anyone on a X9/x10 board that could check what values are used for X9/x10?
Here is my output:
Some digging produced perhaps an additional piece of the puzzle towards better control.
I was looking to very the raw command line that was valid for the X9/x10 boards, to an X11. So far no definitive success.
Yet I found that when running
Code:
ipmitool -v sensor
The sensor ID is also displayed with its raw reference value (at least it looks so).
Anyone on a X9/x10 board that could check what values are used for X9/x10?
Here is my output:
Code:
Sensor ID : FAN1 (0x41) Entity ID : 29.1 Sensor Type (Threshold) : Fan Sensor Reading : 600 (+/- 0) RPM Status : Lower Non-Critical Lower Non-Recoverable : 300.000 Lower Critical : 500.000 Lower Non-Critical : 700.000 Upper Non-Critical : 25300.000 Upper Critical : 25400.000 Upper Non-Recoverable : 25500.000 Positive Hysteresis : 100.000 Negative Hysteresis : 100.000 Assertion Events : Assertions Enabled : lcr- lnr- ucr+ unr+ Deassertions Enabled : lcr- lnr- ucr+ unr+ Sensor ID : FAN2 (0x42) Entity ID : 29.2 Sensor Type (Threshold) : Fan Sensor Reading : Unable to read sensor: Device Not Present Sensor ID : FAN3 (0x43) Entity ID : 29.3 Sensor Type (Threshold) : Fan Sensor Reading : Unable to read sensor: Device Not Present Sensor ID : FAN4 (0x44) Entity ID : 29.4 Sensor Type (Threshold) : Fan Sensor Reading : 700 (+/- 0) RPM Status : Lower Non-Critical Lower Non-Recoverable : 300.000 Lower Critical : 500.000 Lower Non-Critical : 700.000 Upper Non-Critical : 25300.000 Upper Critical : 25400.000 Upper Non-Recoverable : 25500.000 Positive Hysteresis : 100.000 Negative Hysteresis : 100.000 Assertion Events : Assertions Enabled : lcr- lnr- ucr+ unr+ Deassertions Enabled : lcr- lnr- ucr+ unr+ Sensor ID : FANA (0x45) Entity ID : 29.5 Sensor Type (Threshold) : Fan Sensor Reading : 700 (+/- 0) RPM Status : Lower Non-Critical Lower Non-Recoverable : 300.000 Lower Critical : 500.000 Lower Non-Critical : 700.000 Upper Non-Critical : 25300.000 Upper Critical : 25400.000 Upper Non-Recoverable : 25500.000 Positive Hysteresis : 100.000 Negative Hysteresis : 100.000 Assertion Events : Assertions Enabled : lcr- lnr- ucr+ unr+ Deassertions Enabled : lcr- lnr- ucr+ unr+