Tom Stevensuk
Cadet
- Joined
- Apr 17, 2015
- Messages
- 6
Hi,
we have the following issue with one of our freenas Boxes
Freenas version - 9.3 201504100216
Zpool 1 20x 4TB disk - setup with 4 x 5 Disk vdevs
Please see status below when we mount the drive as read only
state: ONLINE
status: One or more devices has experienced an error resulting in data
corruption. Applications may be affected.
action: Restore the file in question if possible. Otherwise restore the
entire pool from backup.
see: http://illumos.org/msg/ZFS-8000-8A
scan: resilvered 10.5G in 7h52m with 56590606 errors on Thu Apr 2 19:40:09 2015
config:
NAME STATE READ WRITE CKSUM
pool1 ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
gptid/93b4b933-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/949b1fc7-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/955bd194-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/961a184c-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/96da185e-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
raidz1-1 ONLINE 0 0 0
gptid/97978983-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/9855bdc9-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/990b7193-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/99d37070-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/9a9969e2-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
raidz1-2 ONLINE 0 0 0
gptid/9b617d81-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/9c244c16-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/9ce14d78-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/9da84822-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
replacing-4 ONLINE 0 0 0
gptid/9e6ea11e-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/1c596109-d968-11e4-97e3-0cc47a44f42e ONLINE 0 0 0
raidz1-3 ONLINE 0 0 0
gptid/9f2e4501-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/9ff3ee92-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/a0c598e1-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/a190bfac-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/a2597adb-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
The Issue is that we had a Disk Failure so replaced the disk and during the resilvering the Box Crashed
Since then i have been unable to boot as it keeps crashing (Panic) when mount the zpool
I have stuck another USB Disk in to boot from, and can only mount the device as read only.
when running zpool import -f pool name we get the Panic Error
Im Currently runing zpool status -v and will post when finished
I have run a zdb -e pool1 and it fails checking vdev 0
I have also tried an zpool clear -f pool1 with no joy
Any thouhgts
Please not i am using the LSI 9211-8i HBA, this was on firmware version 20 and has been downgrade to 16 as i thought this may have been an issue.
we have the following issue with one of our freenas Boxes
Freenas version - 9.3 201504100216
Zpool 1 20x 4TB disk - setup with 4 x 5 Disk vdevs
Please see status below when we mount the drive as read only
state: ONLINE
status: One or more devices has experienced an error resulting in data
corruption. Applications may be affected.
action: Restore the file in question if possible. Otherwise restore the
entire pool from backup.
see: http://illumos.org/msg/ZFS-8000-8A
scan: resilvered 10.5G in 7h52m with 56590606 errors on Thu Apr 2 19:40:09 2015
config:
NAME STATE READ WRITE CKSUM
pool1 ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
gptid/93b4b933-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/949b1fc7-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/955bd194-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/961a184c-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/96da185e-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
raidz1-1 ONLINE 0 0 0
gptid/97978983-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/9855bdc9-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/990b7193-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/99d37070-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/9a9969e2-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
raidz1-2 ONLINE 0 0 0
gptid/9b617d81-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/9c244c16-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/9ce14d78-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/9da84822-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
replacing-4 ONLINE 0 0 0
gptid/9e6ea11e-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/1c596109-d968-11e4-97e3-0cc47a44f42e ONLINE 0 0 0
raidz1-3 ONLINE 0 0 0
gptid/9f2e4501-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/9ff3ee92-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/a0c598e1-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/a190bfac-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
gptid/a2597adb-b3ab-11e4-9dcc-0cc47a44f42e ONLINE 0 0 0
The Issue is that we had a Disk Failure so replaced the disk and during the resilvering the Box Crashed
Since then i have been unable to boot as it keeps crashing (Panic) when mount the zpool
I have stuck another USB Disk in to boot from, and can only mount the device as read only.
when running zpool import -f pool name we get the Panic Error
Im Currently runing zpool status -v and will post when finished
I have run a zdb -e pool1 and it fails checking vdev 0
I have also tried an zpool clear -f pool1 with no joy
Any thouhgts
Please not i am using the LSI 9211-8i HBA, this was on firmware version 20 and has been downgrade to 16 as i thought this may have been an issue.