boospy
Cadet
- Joined
- Oct 8, 2014
- Messages
- 3
Hello,
Freenas 9.2.1.8 64bit
we build an freenas with these hardware:
- Motherboard Supermicro X9SAE-V
- CPU Int Xeon E3-1220L v2 2200 1155 TRAY
- ECC RAM
- ADAPTEC HBA 6805H SATA/SAS
We have installed the system on an USBstick. But from the internal sataconnectors only one of them work. The Adaptec controller does not work. But at bootprocess all disk are accessable from the system, so what is the problem here?
For test we booted an Ubuntulive, and everything works fine. Then we tested a nas4free and all internal connectors works fine, but the Adaptec controller does alos not work on nas4free.
Thanks for help.
Regards boospy
Freenas 9.2.1.8 64bit
we build an freenas with these hardware:
- Motherboard Supermicro X9SAE-V
- CPU Int Xeon E3-1220L v2 2200 1155 TRAY
- ECC RAM
- ADAPTEC HBA 6805H SATA/SAS
We have installed the system on an USBstick. But from the internal sataconnectors only one of them work. The Adaptec controller does not work. But at bootprocess all disk are accessable from the system, so what is the problem here?
For test we booted an Ubuntulive, and everything works fine. Then we tested a nas4free and all internal connectors works fine, but the Adaptec controller does alos not work on nas4free.
Thanks for help.
Regards boospy