Hi all,
frustration rises...
I got a HP N40L with the well-known onboard broadcom NIC. I made first NAS steps with 8.3.1 release with separate Intel NIC (em driver) where WoL worked from the very beginning. Now I upgraded to 9.2.1.6 and I can not get WoL working! I still searched forum and google and found:
http://forums.freenas.org/index.php?threads/wake-on-lan.13508/page-3
https://bugs.freenas.org/issues/3764
But none of the recipes worked for me, neither on the onboard broadcom NIC nor on the PCIe card Intel NIC. Just for verification I installed FreeBSD 10 on usb stick and WoL worked perfect (on the Intel NIC), even on tagged VLAN interfaces. WoL in BIOS for onboard NIC is enabled.
Advisories, suggestions, hints, links...everything welcome!
interface config:
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO>
ether 68:05:ca:13:45:0f
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect
status: no carrier
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=82080<VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
ether a0:b3:cc:e2:53:62
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
ipfw0: flags=8801<UP,SIMPLEX,MULTICAST> metric 0 mtu 65536
nd6 options=9<PERFORMNUD,IFDISABLED>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0xa
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
vlan3: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether a0:b3:cc:e2:53:62
inet 192.168.1.98 netmask 0xffffff00 broadcast 192.168.1.255
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
vlan: 3 parent interface: bge0
vlan4: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1496
ether a0:b3:cc:e2:53:62
inet 10.0.0.98 netmask 0xffffff00 broadcast 10.0.0.255
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
vlan: 4 parent interface: bge0
Regards
frustration rises...
I got a HP N40L with the well-known onboard broadcom NIC. I made first NAS steps with 8.3.1 release with separate Intel NIC (em driver) where WoL worked from the very beginning. Now I upgraded to 9.2.1.6 and I can not get WoL working! I still searched forum and google and found:
http://forums.freenas.org/index.php?threads/wake-on-lan.13508/page-3
https://bugs.freenas.org/issues/3764
But none of the recipes worked for me, neither on the onboard broadcom NIC nor on the PCIe card Intel NIC. Just for verification I installed FreeBSD 10 on usb stick and WoL worked perfect (on the Intel NIC), even on tagged VLAN interfaces. WoL in BIOS for onboard NIC is enabled.
Advisories, suggestions, hints, links...everything welcome!
interface config:
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO>
ether 68:05:ca:13:45:0f
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect
status: no carrier
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=82080<VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
ether a0:b3:cc:e2:53:62
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
ipfw0: flags=8801<UP,SIMPLEX,MULTICAST> metric 0 mtu 65536
nd6 options=9<PERFORMNUD,IFDISABLED>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0xa
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
vlan3: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether a0:b3:cc:e2:53:62
inet 192.168.1.98 netmask 0xffffff00 broadcast 192.168.1.255
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
vlan: 3 parent interface: bge0
vlan4: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1496
ether a0:b3:cc:e2:53:62
inet 10.0.0.98 netmask 0xffffff00 broadcast 10.0.0.255
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
vlan: 4 parent interface: bge0
Regards