I have 6 2TB disks in a rackmount running on my second FreeNAS system. My intention was to setup 4 disks plus 2 hot spares in a raidz2 zpool. However, I believe I made a mistake.
What do I have to do in order to reconfigure this system as I originally intended? Do I copy all of the files off to a USB, destroy the zpool and start from scratch?
Thanks Larry
# zpool status -v tank
pool: tank
state: ONLINE
scan: scrub repaired 0 in 0h22m with 0 errors on Sun Nov 9 00:22:02 2014
config:
NAME STATE READ WRITE CKSUM
tank ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
gptid/52f7ee90-24a7-11e4-87dd-002590ea7f96 ONLINE 0 0 0
gptid/5342d9f7-24a7-11e4-87dd-002590ea7f96 ONLINE 0 0 0
gptid/53892247-24a7-11e4-87dd-002590ea7f96 ONLINE 0 0 0
gptid/53ce79a3-24a7-11e4-87dd-002590ea7f96 ONLINE 0 0 0
gptid/5416adbb-24a7-11e4-87dd-002590ea7f96 ONLINE 0 0 0
gptid/545e92d3-24a7-11e4-87dd-002590ea7f96 ONLINE 0 0 0
errors: No known data errors
pool: tank
state: ONLINE
scan: scrub repaired 0 in 0h22m with 0 errors on Sun Nov 9 00:22:02 2014
config:
NAME STATE READ WRITE CKSUM
tank ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
gptid/52f7ee90-24a7-11e4-87dd-002590ea7f96 ONLINE 0 0 0
gptid/5342d9f7-24a7-11e4-87dd-002590ea7f96 ONLINE 0 0 0
gptid/53892247-24a7-11e4-87dd-002590ea7f96 ONLINE 0 0 0
gptid/53ce79a3-24a7-11e4-87dd-002590ea7f96 ONLINE 0 0 0
gptid/5416adbb-24a7-11e4-87dd-002590ea7f96 ONLINE 0 0 0
gptid/545e92d3-24a7-11e4-87dd-002590ea7f96 ONLINE 0 0 0
errors: No known data errors
What do I have to do in order to reconfigure this system as I originally intended? Do I copy all of the files off to a USB, destroy the zpool and start from scratch?
Thanks Larry