heimdull
Cadet
- Joined
- Mar 12, 2013
- Messages
- 7
We had a freenas 8.3.1-RELEASE-p2 server crash hard which caused some corruption. When server tried to reboot it paniced when activation its storage pool. After installing latest version of Frenas 9.2.1.9 to see if that would be able to 'import' out pool it also just hits a panic when you use zpool import -f <name>. (We also tried FreeBSD Latest but same problem)
We have screenshoot of the error if needed but here is what our pool looks like:
[root@tpfs03] ~# zpool import
pool: ymfs
id: 2351354860825601052
state: FAULTED
status: The pool metadata is corrupted.
action: The pool cannot be imported due to damaged devices or data.
The pool may be active on another system, but can be imported using
the '-f' flag.
see: http://illumos.org/msg/ZFS-8000-72
config:
ymfs FAULTED corrupted data
gptid/583c4ae7-8cf4-11e2-b3d4-0025907943e8 ONLINE
[root@fs03] ~# glabel list
Geom name: mfid0p2
Providers:
1. Name: gptid/583c4ae7-8cf4-11e2-b3d4-0025907943e8
Mediasize: 23998129683968 (21T)
Sectorsize: 512
Stripesize: 0
Stripeoffset: 2147549184
Mode: r0w0e0
secoffset: 0
offset: 0
seclength: 46871347039
length: 23998129683968
index: 0
Consumers:
1. Name: mfid0p2
Mediasize: 23998129683968 (21T)
Sectorsize: 512
Stripesize: 0
Stripeoffset: 2147549184
Mode: r0w0e0
Is there anything that can be done to get this pool/data back online? From a few searches I could find more than one person with this issue but no real solution.
I do have a backup of our 8.3.1 config if that would help. (but pool is not version 5000)
Our pool is 1 device that is provided by a Raid10 hardware raid controller.
We have screenshoot of the error if needed but here is what our pool looks like:
[root@tpfs03] ~# zpool import
pool: ymfs
id: 2351354860825601052
state: FAULTED
status: The pool metadata is corrupted.
action: The pool cannot be imported due to damaged devices or data.
The pool may be active on another system, but can be imported using
the '-f' flag.
see: http://illumos.org/msg/ZFS-8000-72
config:
ymfs FAULTED corrupted data
gptid/583c4ae7-8cf4-11e2-b3d4-0025907943e8 ONLINE
[root@fs03] ~# glabel list
Geom name: mfid0p2
Providers:
1. Name: gptid/583c4ae7-8cf4-11e2-b3d4-0025907943e8
Mediasize: 23998129683968 (21T)
Sectorsize: 512
Stripesize: 0
Stripeoffset: 2147549184
Mode: r0w0e0
secoffset: 0
offset: 0
seclength: 46871347039
length: 23998129683968
index: 0
Consumers:
1. Name: mfid0p2
Mediasize: 23998129683968 (21T)
Sectorsize: 512
Stripesize: 0
Stripeoffset: 2147549184
Mode: r0w0e0
Is there anything that can be done to get this pool/data back online? From a few searches I could find more than one person with this issue but no real solution.
I do have a backup of our 8.3.1 config if that would help. (but pool is not version 5000)
Our pool is 1 device that is provided by a Raid10 hardware raid controller.