ghostlobster
Dabbler
- Joined
- Oct 10, 2012
- Messages
- 36
OK, so my nightly auto-tunable threw a potential error last night, saying that a drive might be failing. When I log into my admin console, I have the flashing yellow alert up top, which shows the following:
The output from my tunable report regarding drive health is as follows:
I ran zpool clear RAID yesterday and it returned nothing. No error, no report. As you can see, a scrub against the pool took only 4 minutes.
I've installed another 1TB drive in my box to replace the failing one, but I cannot isolate which drive might be having an issue. Volume status shows all drives as online, the drive in ADA2 is listing "1" in the checksum column. Is that the one that needs replacing? Is that "1" the report of the potential error? I've labeled all my drives with their S/N nice and visible so I won't have to yank the entire rack to figure out which one is which, so that'll be easy.
So, should I do a Replace against the drive in ADA2 within the Freenas Interface?
Thanks
Code:
The volume RAID (ZFS) status is UNKNOWN: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected.Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'.
The output from my tunable report regarding drive health is as follows:
Code:
Checking status of zfs pools: NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT RAID 3.62T 1.12T 2.50T 30% 1.00x ONLINE /mnt external 1.81T 38.0G 1.78T 2% 1.00x ONLINE /mnt pool: RAID state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: http://www.sun.com/msg/ZFS-8000-9P scan: scrub repaired 0 in 0h4m with 0 errors on Sat Oct 27 08:35:25 2012 config: NAME STATE READ WRITE CKSUM RAID ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 gptid/b63615f8-18b8-11e2-a5a9-001617ec2159 ONLINE 0 0 0 gptid/b6e20947-18b8-11e2-a5a9-001617ec2159 ONLINE 0 0 1 gptid/b76d6eb2-18b8-11e2-a5a9-001617ec2159 ONLINE 0 0 0 gptid/b7f68eba-18b8-11e2-a5a9-001617ec2159 ONLINE 0 0 0
I ran zpool clear RAID yesterday and it returned nothing. No error, no report. As you can see, a scrub against the pool took only 4 minutes.
I've installed another 1TB drive in my box to replace the failing one, but I cannot isolate which drive might be having an issue. Volume status shows all drives as online, the drive in ADA2 is listing "1" in the checksum column. Is that the one that needs replacing? Is that "1" the report of the potential error? I've labeled all my drives with their S/N nice and visible so I won't have to yank the entire rack to figure out which one is which, so that'll be easy.
So, should I do a Replace against the drive in ADA2 within the Freenas Interface?
Thanks