unable to access display of VM after traefik setup

[tux-box1]

I followed the official tutorial for setting up traefik, configured truenas scale web ui for port 81/444 respectivly
I'm able to access nextcloud as expected on port 80/443 using some DNS magic on my local net and it works beautifully.
The problem I have now is that I'm unable to access vm display via VNC/SPIC on port 5800
I'm running the scale Ver TrueNAS-SCALE-22.02.1
I was able to access the VM display previously but since then I've setup traefic and updated, I can't say which may be preventing me from access.
Just need a little guidence on what I can do to regain "display" access again so I can setup some VM's for testing some other ideas.

thank you.

 

[tux-box1]

I'm not sure if setting up the external service would work for this case, I don't know if I'd set it up for truenas as a whole or just for vnc/spice

 

[tux-box1]

I found a workaround for my situation, posting it here
enter HTTP://truenasIP:5800/vnc.html?autoconnect=1
I had been trying to access via HTTPS.
I'm abit worried at this time about the security of this but it's behind a fire wall at this time.

 

[tux-box1]

I found a workaround for my situation, posting it here
enter HTTP://truenasIP:5800/vnc.html?autoconnect=1
I had been trying to access via HTTPS.
I'm abit worried at this time about the security of this but it's behind a fire wall at this time.

The VNC app works by connecting to truenasIP:5900
I hope this helps others.