UI broke in FreeNAS-9.10.2 (a476f16) @1485409005

[snaptec]

Good Morning,

strange problem with the ui.

Did the following:

Tonight I got a mail:

Code:

The volume xx (ZFS) state is DEGRADED: One or more devices are faulted in response to persistent errors. Sufficient replicas exist for the pool to continue functioning in a degraded state.

Looking on the webui gives just "There are errors" under the red button.

Clicked on "pool" and the ui broke.

When i now open the webui there is just:

Code:

An error occurred.
Sorry, the page you are looking for is currently unavailable.
Please try again later.

If you are the system administrator of this resource then you should check the error log for details.

Faithfully yours, nginx.

some /var/log/messages output:

Code:

Jan 26 06:27:01 xx swap_pager: I/O error - pagein failed; blkno 12583073,size 12288, error 6

Jan 26 06:27:01 xx vm_fault: pager read error, pid 2731 (python2.7)

Jan 26 06:27:01 xx swap_pager: I/O error - pagein failed; blkno 12582957,size 4096, error 6

Jan 26 06:27:01 xx vm_fault: pager read error, pid 2731 (python2.7)

Jan 26 06:27:01 xx kernel: Failed to write core file for process python2.7 (error 14)

Jan 26 06:27:01 xx kernel: Failed to write core file for process python2.7 (error 14)

Jan 26 06:27:01 xx kernel: pid 2731 (python2.7), uid 0: exited on signal 11

Services (afp, nfs, ssh) are working as normal.


zpool status

Code:

pool: freenas-boot

state: ONLINE

  scan: scrub repaired 0 in 0h0m with 0 errors on Sun Jan  8 15:37:07 2017

config:


	NAME		STATE	 READ WRITE CKSUM

	freenas-boot  ONLINE	   0	 0	 0

	  mirror-0  ONLINE	   0	 0	 0

		ada0p2  ONLINE	   0	 0	 0

		ada1p2  ONLINE	   0	 0	 0


errors: No known data errors


  pool: xx

state: DEGRADED

status: One or more devices are faulted in response to persistent errors.

	Sufficient replicas exist for the pool to continue functioning in a

	degraded state.

action: Replace the faulted device, or use 'zpool clear' to mark the device

	repaired.

  scan: scrub repaired 0 in 11h22m with 0 errors on Sun Jan 22 01:58:14 2017

config:


	NAME											STATE	 READ WRITE CKSUM

	xx									 DEGRADED	 0	 0	 0

	  raidz2-0									  ONLINE	   0	 0	 0

		gptid/9fc4b38a-db17-11e6-8b3d-001e67bb79ae  ONLINE	   0	 0	 0

		gptid/a0d212bf-db17-11e6-8b3d-001e67bb79ae  ONLINE	   0	 0	 0

		gptid/a2bc5248-db17-11e6-8b3d-001e67bb79ae  ONLINE	   0	 0	 0

		gptid/a512edd4-db17-11e6-8b3d-001e67bb79ae  ONLINE	   0	 0	 0

		gptid/a759705c-db17-11e6-8b3d-001e67bb79ae  ONLINE	   0	 0	 0

		gptid/a89f7799-db17-11e6-8b3d-001e67bb79ae  ONLINE	   0	 0	 0

		gptid/a95b787b-db17-11e6-8b3d-001e67bb79ae  ONLINE	   0	 0	 0

		gptid/cbb4b350-dc17-11e6-8b3d-001e67bb79ae  ONLINE	   0	 0	 0

	  raidz2-1									  DEGRADED	 0	 0	 0

		gptid/424b2a29-dcd9-11e6-8b3d-001e67bb79ae  ONLINE	   0	 0	 0

		gptid/43405eaf-dcd9-11e6-8b3d-001e67bb79ae  ONLINE	   0	 0	 0

		gptid/444b369b-dcd9-11e6-8b3d-001e67bb79ae  ONLINE	   0	 0	 0

		gptid/0ea8a1e2-dfba-11e6-8b3d-001e67bb79ae  FAULTED	  0	 4	 0  too many errors

		gptid/476ecf7f-dcd9-11e6-8b3d-001e67bb79ae  ONLINE	   0	 0	 0

		gptid/48360f40-dcd9-11e6-8b3d-001e67bb79ae  ONLINE	   0	 0	 0

		gptid/49c75e91-dcd9-11e6-8b3d-001e67bb79ae  ONLINE	   0	 0	 0

		gptid/4bb5b5d7-dcd9-11e6-8b3d-001e67bb79ae  ONLINE	   0	 0	 0


errors: No known data errors

Already searched about that, reboot should fix it. For debugging purposes I didn't reboot yet and would like to replace the faulty drive first.
Anything I should add?

HW is SM board with a e3 1231 v3, 16gb ddr3 ecc ram, lsi16i hba, mirrored ssd boot device and 2 vdevs each 8x 2TB in raidz2[/CODE]

 

[dlavigne]

Did you replace the fault device using the instructions at http://doc.freenas.org/9.10/storage.html#replacing-a-failed-drive?

 

[snaptec]

The ui broke before I was able to do that.

Yesterday I did a reboot and replaced the failed drive.
Didn't happen again.
It's just a drive from the pool. Not the boot mirror.


Gesendet von iPhone mit Tapatalk