Dariusz1989
Contributor
- Joined
- Aug 22, 2017
- Messages
- 185
Hey
Uhh.. new and green with this.
In any case I've followed some tutorials but I'm still failing.
I can access my NAS & Storage from Client, but pinging any other device on network does not work.
So perhaps some1 can help
I have no DHCP server on my local network.
The config as follows:
Nic1 Internat
192.168.0.0 < my Router (I believe) DHPC
192.168.0.10 < my TrueNas & OpenVPN
Nic2 LAN only
192.168.3.0 < my switch (I believe) - No DHPC - all is static ips.
192.168.3.150 < my TrueNas & OpenVPN - as service not jail
192.168.3.170 < Local only system
OpenVPN Server config
server:
192.168.4.0
Additional parameters
push "route 192.168.3.0 255.255.255.0" < this allowes me to access server again via:
ping 192.168.3.150 = works.
However if I do ping 192.168.3.170 which is another pc on network, I no longer get ping.
How can I properly push all trafic from openVPN network to my local network?
I'm a tad lost, I've seen lots of answers and posts on this but I could not get any of it work :- (
Regards
Dariusz
Uhh.. new and green with this.
In any case I've followed some tutorials but I'm still failing.
I can access my NAS & Storage from Client, but pinging any other device on network does not work.
So perhaps some1 can help
I have no DHCP server on my local network.
The config as follows:
Nic1 Internat
192.168.0.0 < my Router (I believe) DHPC
192.168.0.10 < my TrueNas & OpenVPN
Nic2 LAN only
192.168.3.0 < my switch (I believe) - No DHPC - all is static ips.
192.168.3.150 < my TrueNas & OpenVPN - as service not jail
192.168.3.170 < Local only system
OpenVPN Server config
server:
192.168.4.0
Additional parameters
push "route 192.168.3.0 255.255.255.0" < this allowes me to access server again via:
ping 192.168.3.150 = works.
However if I do ping 192.168.3.170 which is another pc on network, I no longer get ping.
How can I properly push all trafic from openVPN network to my local network?
I'm a tad lost, I've seen lots of answers and posts on this but I could not get any of it work :- (
Regards
Dariusz
Last edited: