So, I finally built my FreeNAS server -- installed 6 x 2TB drives, and formatted it to Raid-Z2.
I created a volume 7.1TB in size, and signed it over to iSCSI.
I have a WHS 2011 machine which uses the iSCSI drive as its primary drive, with all of the shares on the iSCSI drive - across a dedicated Gigabit NIC.
I started transferring the data from my old WHS v1 machine over to the new machine combo pair yesterday -- and it got about 3.5TB into a 5TB transfer, before Windows Update installed a bunch of stuff at 3am this morning, and rebooted the WHS 2011 machine (which didn't recover from the reboot until I got up this morning and manually reset it)
At the point of rebooting the WHS 2011 machine, the FreeNAS machine started logging issues with the iSCSI link.
I awoke this morning to about 80 emails about my drive being full, and not being able to draw some graphs... I'm assuming a log file has filled up somewhere, but I don't know enough to clean it out -- and I don't see any GUI options for clearing out log files...
Any help to stop this bombardment of emails would be appreciated...
Thx
Dave
I created a volume 7.1TB in size, and signed it over to iSCSI.
I have a WHS 2011 machine which uses the iSCSI drive as its primary drive, with all of the shares on the iSCSI drive - across a dedicated Gigabit NIC.
I started transferring the data from my old WHS v1 machine over to the new machine combo pair yesterday -- and it got about 3.5TB into a 5TB transfer, before Windows Update installed a bunch of stuff at 3am this morning, and rebooted the WHS 2011 machine (which didn't recover from the reboot until I got up this morning and manually reset it)
At the point of rebooting the WHS 2011 machine, the FreeNAS machine started logging issues with the iSCSI link.
I awoke this morning to about 80 emails about my drive being full, and not being able to draw some graphs... I'm assuming a log file has filled up somewhere, but I don't know enough to clean it out -- and I don't see any GUI options for clearing out log files...
Any help to stop this bombardment of emails would be appreciated...
Thx
Dave
Code:
Subject: Cron <root@freenas> /usr/local/bin/python /usr/local/bin/graph.py From: root <root@freenas> To: root Date: Tue, 27 Mar 2012 17:00:09 -0000 X-Cron-Env: <SHELL=/bin/sh> Traceback (most recent call last): File "/usr/local/bin/graph.py", line 480, in <module> GenerateInterfaceGraph() File "/usr/local/bin/graph.py", line 135, in GenerateInterfaceGraph 'GPRINT:global_tot_tx:ca. %5.1lf%s Total\l' rrdtool.error: Could not save png to '/tmp/graph/if-em0-1h.png'
Code:
Subject: Cron <root@freenas> newsyslog From: root <root@freenas> To: root Date: Tue, 27 Mar 2012 14:00:36 -0000 X-Cron-Env: <SHELL=/bin/sh> bzip2: I/O or other error, bailing out. Possible reason follows. bzip2: No space left on device Input file =3D /var/log/messages.0, output file =3D /var/log/messages.0.bz2 bzip2: Deleting output file /var/log/messages.0.bz2, if it exists. newsyslog: `bzip2 -f /var/log/messages.0' terminated with a non-zero status= (1)
Code:
From: root <root@freenas> To: root Date: Tue, 27 Mar 2012 19:00:11 -0000 X-Cron-Env: <SHELL=/bin/sh> newsyslog: log_trim: fclose: No space left on device