Hi everyone,
I have:
HP Proliant Microserver 40L
5x Seagate st2000dl003 HDDs
Freenas 7 (latest stable release 0.7.2)
I have installed 1 of the Seagate st2000dl003 HDDs in the Optical Disk Drive bay.
I updated the HP Proliant Microserver BIOS to allow full speed SATA to the Optical Disk Drive bay via the SATA cable connection on the motherboard.
I installed FreeNAS 7 to run off of a USB stick plugged into the motherboard.
On boot up FreeNAS reports that all drives are MASTER apart from 1 drive which I believe is in the ODD bay which is listed as SLAVE and UDMA 33 as opposed to SATA.
I have tried 3 different SATA cables, all with the same UDMA 33 result posted on screen.
The Seagate st2000dl003 HDD also doesn't appear to have any jumper / physical jumper place on it, so as far as I can tell I can't just add a jumper correctly to make it MASTER.
Any help would be appreciated, I'm new here and completey out of my depth now, I can't think what it is.
Thanks for any help!
I have:
HP Proliant Microserver 40L
5x Seagate st2000dl003 HDDs
Freenas 7 (latest stable release 0.7.2)
I have installed 1 of the Seagate st2000dl003 HDDs in the Optical Disk Drive bay.
I updated the HP Proliant Microserver BIOS to allow full speed SATA to the Optical Disk Drive bay via the SATA cable connection on the motherboard.
I installed FreeNAS 7 to run off of a USB stick plugged into the motherboard.
On boot up FreeNAS reports that all drives are MASTER apart from 1 drive which I believe is in the ODD bay which is listed as SLAVE and UDMA 33 as opposed to SATA.
I have tried 3 different SATA cables, all with the same UDMA 33 result posted on screen.
The Seagate st2000dl003 HDD also doesn't appear to have any jumper / physical jumper place on it, so as far as I can tell I can't just add a jumper correctly to make it MASTER.
Any help would be appreciated, I'm new here and completey out of my depth now, I can't think what it is.
Thanks for any help!