Please help, screwed up power to FreeNas and lost disks?

Quicksilv3r · Sep 14, 2020

Hey guys,

I'm a 2yr user (very novice still so be nice haha) So, on Saturday, I was moving a few things around, and knocked the surge protector off the wall (no UPS) and my server (11.3 u4.1) turned off, I plugged everything back in, and couldn't get anything to start up, so reinstalled FreeNas on my SSD drive, and I was able to get back into FreeNas, but I lost my pool.

When I boot up, I get something that says GEOM ADA1 - Corrupt or invalid GPT Detected - GPT Rejected - may not be recoverable

I tried to do a few things, couldn't get the pool to load, actually pulled all the drives and quickly built another server box thinking something with the sata connections (motherboard) might have fried.

When i log into the webgui, I see my 3x 4TB drives, but I try to import the pool, it is blank, and I went into gpart status, and it shows my boot drive SSD and 1 of my 4TB drives. But if I go into disks in the webgui, the drives all show and show as being healthy.

I've included some screen shots, PLEASE help me.

c77dk · Sep 14, 2020

Might you have hit something like this? https://www.ixsystems.com/community...s-system-fault-may-lead-to-dead-system.50314/

Quicksilv3r · Sep 14, 2020

c77dk said:
Might you have hit something like this? https://www.ixsystems.com/community...s-system-fault-may-lead-to-dead-system.50314/

nope not that. I have a Core2Quad with a Gigabyte P45 board

c77dk · Sep 14, 2020

Quicksilv3r said:
nope not that. I have a Core2Quad with a Gigabyte P45 board

Aaah, just saw the "c2" part :D

HoneyBadger · Sep 14, 2020

Check to ensure that your drives are being detected in your BIOS or hardware level first.

Next, see if they are visible in geom disk list

From there, check if they're seen by smartctl -a /dev/adaX and if it's throwing any horrible looking warnings.

sretalla · Sep 14, 2020

Quicksilv3r said:
GEOM ADA1 - Corrupt or invalid GPT Detected - GPT Rejected - may not be recoverable

I think you may be in the right area in having seen this as at least part of the problem

if you do dmesg | grep Corrupt what do you see?

If it's only ada1, maybe excluding that disk and having a shot at importing the pool might be a way forward... if that gets you to an imported (but degraded) pool, you can wipe and resilver ada1 back in.

If not, or if your pool had no redundancy (in which case, welcome to your very harsh lesson in potential data loss), you may be able to dig up a thread which talks about using the partition headers from one of the other disks to replace the corrupt one(s), but I feel like that's a topic a bit too far advanced to link to right now unless there are no options left.

Quicksilv3r · Sep 14, 2020

sretalla said:
I think you may be in the right area in having seen this as at least part of the problem

if you do dmesg | grep Corrupt what do you see?

If it's only ada1, maybe excluding that disk and having a shot at importing the pool might be a way forward... if that gets you to an imported (but degraded) pool, you can wipe and resilver ada1 back in.

If not, or if your pool had no redundancy (in which case, welcome to your very harsh lesson in potential data loss), you may be able to dig up a thread which talks about using the partition headers from one of the other disks to replace the corrupt one(s), but I feel like that's a topic a bit too far advanced to link to right now unless there are no options left.

So I did the dmesg and it didn't do anything.

root@freenas[~]# dmesg | grep Corrupt
root@freenas[~]#
[\quote]

Quicksilv3r · Sep 14, 2020

HoneyBadger said:
Check to ensure that your drives are being detected in your BIOS or hardware level first.

Next, see if they are visible in geom disk list

From there, check if they're seen by smartctl -a /dev/adaX and if it's throwing any horrible looking warnings.

ADA1

Code:

smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p11 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD40EFRX-68WT0N0
Serial Number:    WD-WCC4E5KSRC53
LU WWN Device Id: 5 0014ee 2b7b94bfe
Firmware Version: 82.00A82
User Capacity:    4,000,785,948,160 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Mon Sep 14 18:15:35 2020 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (51060) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 511) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x703d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   194   180   021    Pre-fail  Always       -       7258
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       95
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   081   081   000    Old_age   Always       -       14037
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       95
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       78
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       281
194 Temperature_Celsius     0x0022   111   108   000    Old_age   Always       -       41
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

ADA2

Code:

smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p11 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD40EFRX-68N32N0
Serial Number:    WD-WCC7K2PSA9ND
LU WWN Device Id: 5 0014ee 2bab471ba
Firmware Version: 82.00A82
User Capacity:    4,000,785,948,160 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 5
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Mon Sep 14 18:16:41 2020 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (44640) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 473) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x303d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   182   164   021    Pre-fail  Always       -       5875
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       165
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   079   079   000    Old_age   Always       -       15823
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       165
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       136
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       59
194 Temperature_Celsius     0x0022   114   111   000    Old_age   Always       -       36
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

ADA3

Code:


smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p11 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD40EZRZ-00GXCB0
Serial Number:    WD-WCC7K1FA5EHA
LU WWN Device Id: 5 0014ee 20f60ee42
Firmware Version: 80.00A80
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 5
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Mon Sep 14 18:17:56 2020 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (44160) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 468) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x3035) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   181   161   021    Pre-fail  Always       -       5908
  4 Start_Stop_Count        0x0032   098   098   000    Old_age   Always       -       2387
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   077   077   000    Old_age   Always       -       17420
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   098   098   000    Old_age   Always       -       2387
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       144
193 Load_Cycle_Count        0x0032   001   001   000    Old_age   Always       -       1549465
194 Temperature_Celsius     0x0022   115   102   000    Old_age   Always       -       35
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

HoneyBadger · Sep 14, 2020

Quicksilv3r said:
ADA3
193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 1549465

If that drive hasn't already failed, it's probably going to. A million and a half LCCs is well past its duty cycle.

Do you know your pool config? A Z1 will import if only short one drive.

Important Announcement for the TrueNAS Community.

Please help, screwed up power to FreeNas and lost disks?

Quicksilv3r

Dabbler

Attachments

c77dk

Patron

Quicksilv3r

Dabbler

c77dk

Patron

HoneyBadger

actually does care

sretalla

Powered by Neutrality

Quicksilv3r

Dabbler

Quicksilv3r

Dabbler

HoneyBadger

actually does care

Similar threads