Here is the scenario,
Cant import existing volume naming "DATA" from the GUI.
zpool status -v
zpool list
- I have no data backup off my freenas usb boot
- moved my 4x hdd off to new motherboard and new freenas 9.1 usb boot
Cant import existing volume naming "DATA" from the GUI.
zpool status -v
Code:
[root@freenas] /# zpool status -v pool: DATA state: ONLINE status: The pool is formatted using a legacy on-disk format. The pool can still be used, but some features are unavailable. action: Upgrade the pool using 'zpool upgrade'. Once this is done, the pool will no longer be accessible on software that does not support feature flags. scan: none requested config: NAME STATE READ WRITE CKSUM DATA ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 gptid/6bb728fe-9705-11e1-9c01-0013d41fa50d ONLINE 0 0 0 gptid/6c4f32fb-9705-11e1-9c01-0013d41fa50d ONLINE 0 0 0 gptid/6ca73e12-9705-11e1-9c01-0013d41fa50d ONLINE 0 0 0 gptid/6cf15a0a-9705-11e1-9c01-0013d41fa50d ONLINE 0 0 0 errors: No known data errors pool: freenas-boot state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM freenas-boot ONLINE 0 0 0 da0p2 ONLINE 0 0 0 errors: No known data errors [root@freenas] /#
zpool list
Code:
[root@freenas] /# zpool list NAME SIZE ALLOC FREE EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT DATA 7.25T 4.46T 2.79T - - 61% 1.00x ONLINE - freenas-boot 1.89G 491M 1.41G - - 25% 1.00x ONLINE -