PetrZ
Dabbler
- Joined
- Feb 23, 2018
- Messages
- 20
Just tried one of boxes with nextcloud. I don't like what I see.
I know that nextcloud use mySQL / mariadb, I know it's not good idea to run DB on RAIDZ1 of slow drives, but 6 hours?
Most of the time CPU load was close to zero, very low . Is it normal with used HW, or is it configuration issue? Or result of pool usage (almost full)? Iocage use zpool NAS.
ProLiant DL360 G6, 2x Xeon E5620 @ 2.40GHz, DDR3 16GB (4x4GB - Speed: 1333 MT/s, Configured Clock Speed: 800 MT/s)
Code:
Starting scan for user 1 out of 1 (petr) +---------+-------+--------------+ | Folders | Files | Elapsed time | +---------+-------+--------------+ | 338 | 40670 | 06:08:35 | +---------+-------+--------------+
I know that nextcloud use mySQL / mariadb, I know it's not good idea to run DB on RAIDZ1 of slow drives, but 6 hours?
Most of the time CPU load was close to zero, very low . Is it normal with used HW, or is it configuration issue? Or result of pool usage (almost full)? Iocage use zpool NAS.
ProLiant DL360 G6, 2x Xeon E5620 @ 2.40GHz, DDR3 16GB (4x4GB - Speed: 1333 MT/s, Configured Clock Speed: 800 MT/s)
Code:
Index Type ID ID Pci Address Ven ID Dev ID ----- ------------ ------ ------ ----------------- ------ ------ 0 SAS2308_2 1000h 87h 00h:07h:00h:00h 1000h 3020h Adapter Selected is a LSI SAS: SAS2308_2(D1) Controller Number : 0 Controller : SAS2308_2(D1) PCI Address : 00:07:00:00 SAS Address : 500605b-0-071f-e7d0 NVDATA Version (Default) : 14.01.00.06 NVDATA Version (Persistent) : 14.01.00.06 Firmware Product ID : 0x2214 (IT) Firmware Version : 20.00.07.00 NVDATA Vendor : LSI NVDATA Product ID : SAS9207-8i BIOS Version : 07.39.02.00 UEFI BSD Version : N/A FCODE Version : N/A Board Name : H220 Board Assembly : H3-25278-05D Board Tracer Number : SV34428252 ------------------------------------------------------------------------ Controller information ------------------------------------------------------------------------ Controller type : SAS2308_2 BIOS version : 7.39.02.00 Firmware version : 20.00.07.00 Channel description : 1 Serial Attached SCSI Initiator ID : 0 Maximum physical devices : 1023 Concurrent commands supported : 10240 Slot : 2 Segment : 0 Bus : 7 Device : 0 Function : 0 RAID Support : No ------------------------------------------------------------------------ IR Volume information ------------------------------------------------------------------------ ------------------------------------------------------------------------ Physical device information ------------------------------------------------------------------------ Initiator at ID #0 Device is a Hard disk Enclosure # : 1 Slot # : 0 SAS Address : 4433221-1-0300-0000 State : Ready (RDY) Size (in MB)/(in sectors) : 1907729/3907029167 Manufacturer : ATA Model Number : ST2000LM015-2E81 Firmware Revision : SDM1 Serial No : WDZAVJNQ GUID : N/A Protocol : SATA Drive Type : SATA_HDD Device is a Hard disk Enclosure # : 1 Slot # : 1 SAS Address : 4433221-1-0200-0000 State : Ready (RDY) Size (in MB)/(in sectors) : 1907729/3907029167 Manufacturer : ATA Model Number : ST2000LM015-2E81 Firmware Revision : SDM1 Serial No : WDZAVCBX GUID : N/A Protocol : SATA Drive Type : SATA_HDD Device is a Hard disk Enclosure # : 1 Slot # : 2 SAS Address : 4433221-1-0100-0000 State : Ready (RDY) Size (in MB)/(in sectors) : 1907729/3907029167 Manufacturer : ATA Model Number : ST2000LM015-2E81 Firmware Revision : SDM1 Serial No : WDZAR1JJ GUID : N/A Protocol : SATA Drive Type : SATA_HDD Device is a Hard disk Enclosure # : 1 Slot # : 3 SAS Address : 4433221-1-0000-0000 State : Ready (RDY) Size (in MB)/(in sectors) : 1907729/3907029167 Manufacturer : ATA Model Number : ST2000LM015-2E81 Firmware Revision : SDM1 Serial No : WDZAVDTK GUID : N/A Protocol : SATA Drive Type : SATA_HDD Device is a Hard disk Enclosure # : 1 Slot # : 4 SAS Address : 4433221-1-0700-0000 State : Ready (RDY) Size (in MB)/(in sectors) : 1907729/3907029167 Manufacturer : ATA Model Number : ST2000LM015-2E81 Firmware Revision : SDM1 Serial No : ZDZ4J9V3 GUID : N/A Protocol : SATA Drive Type : SATA_HDD Device is a Hard disk Enclosure # : 1 Slot # : 5 SAS Address : 4433221-1-0600-0000 State : Ready (RDY) Size (in MB)/(in sectors) : 1907729/3907029167 Manufacturer : ATA Model Number : ST2000LM015-2E81 Firmware Revision : SDM1 Serial No : ZDZ4LAPJ GUID : N/A Protocol : SATA Drive Type : SATA_HDD Device is a Hard disk Enclosure # : 1 Slot # : 6 SAS Address : 4433221-1-0500-0000 State : Ready (RDY) Size (in MB)/(in sectors) : 1907729/3907029167 Manufacturer : ATA Model Number : ST2000LM015-2E81 Firmware Revision : SDM1 Serial No : ZDZ4LCSC GUID : N/A Protocol : SATA Drive Type : SATA_HDD Device is a Hard disk Enclosure # : 1 Slot # : 7 SAS Address : 4433221-1-0400-0000 State : Ready (RDY) Size (in MB)/(in sectors) : 1907729/3907029167 Manufacturer : ATA Model Number : ST2000LM015-2E81 Firmware Revision : SDM1 Serial No : ZDZ4JB4W GUID : N/A Protocol : SATA Drive Type : SATA_HDD ------------------------------------------------------------------------ Enclosure information ------------------------------------------------------------------------ Enclosure# : 1 Logical ID : 500605b0:071fe7d0 Numslots : 8 StartSlot : 0 ------------------------------------------------------------------------
Code:
NAME SIZE ALLOC FREE CKPOINT EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT BACKUP 7.25T 722G 6.54T - - 0% 9% 1.00x ONLINE /mnt EXT_2TB 1.81T 23.5G 1.79T - - 0% 1% 1.00x ONLINE /mnt NAS 7.25T 6.85T 413G - - 40% 94% 1.00x ONLINE /mnt USB3 12.5G 1.36G 11.1G - - 1% 10% 1.00x ONLINE /mnt freenas-boot 7.44G 4.08G 3.36G - - - 54% 1.00x ONLINE - pool: BACKUP state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM BACKUP ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 gptid/b064c9d4-14fb-11e9-a9a1-0026557cfab4.eli ONLINE 0 0 0 gptid/b18d71c2-14fb-11e9-a9a1-0026557cfab4.eli ONLINE 0 0 0 gptid/b2e30fd2-14fb-11e9-a9a1-0026557cfab4.eli ONLINE 0 0 0 gptid/b40b2a96-14fb-11e9-a9a1-0026557cfab4.eli ONLINE 0 0 0 errors: No known data errors pool: EXT_2TB state: ONLINE status: Some supported features are not enabled on the pool. The pool can still be used, but some features are unavailable. action: Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer be accessible by software that does not support the features. See zpool-features(7) for details. scan: scrub repaired 0 in 0 days 00:04:23 with 0 errors on Sun Feb 10 00:04:25 2019 config: NAME STATE READ WRITE CKSUM EXT_2TB ONLINE 0 0 0 gptid/dbb106c3-f021-11e8-a7d0-0026557cfab4 ONLINE 0 0 0 errors: No known data errors pool: NAS state: ONLINE scan: scrub repaired 0 in 0 days 12:08:34 with 0 errors on Sun Feb 3 12:08:42 2019 config: NAME STATE READ WRITE CKSUM NAS ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 gptid/d34790f0-6a82-11e8-86ba-0026557cfab4.eli ONLINE 0 0 0 gptid/d47089ec-6a82-11e8-86ba-0026557cfab4.eli ONLINE 0 0 0 gptid/d5a54405-6a82-11e8-86ba-0026557cfab4.eli ONLINE 0 0 0 gptid/d6c872b8-6a82-11e8-86ba-0026557cfab4.eli ONLINE 0 0 0 errors: No known data errors pool: USB3 state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM USB3 ONLINE 0 0 0 gptid/fde7e527-2c51-11e9-b48f-0026557cfab4 ONLINE 0 0 0 errors: No known data errors pool: freenas-boot state: ONLINE scan: scrub repaired 0 in 0 days 00:05:50 with 0 errors on Wed Feb 6 03:50:50 2019 config: NAME STATE READ WRITE CKSUM freenas-boot ONLINE 0 0 0 da10p2 ONLINE 0 0 0 errors: No known data errors
Code:
512 # sectorsize 2000398934016 # mediasize in bytes (1.8T) 3907029168 # mediasize in sectors 4096 # stripesize 0 # stripeoffset 243201 # Cylinders according to firmware. 255 # Heads according to firmware. 63 # Sectors according to firmware. ATA ST2000LM015-2E81 # Disk descr. ZDZ4JB4W # Disk ident. No # TRIM/UNMAP support 5400 # Rotation rate in RPM Not_Zoned # Zone Mode Seek times: Full stroke: 250 iter in 7.903764 sec = 31.615 msec Half stroke: 250 iter in 5.498235 sec = 21.993 msec Quarter stroke: 500 iter in 5.078009 sec = 10.156 msec Short forward: 400 iter in 3.125580 sec = 7.814 msec Short backward: 400 iter in 2.756943 sec = 6.892 msec Seq outer: 2048 iter in 0.131884 sec = 0.064 msec Seq inner: 2048 iter in 1.140489 sec = 0.557 msec Transfer rates: outside: 102400 kbytes in 0.820239 sec = 124842 kbytes/sec middle: 102400 kbytes in 0.860171 sec = 119046 kbytes/sec inside: 102400 kbytes in 1.755340 sec = 58336 kbytes/sec