Not Able to see the entire disk...

[Luis Fernando Lacayo]

Hi I am new to FreeNAS, and I have a quick question.

I have a 350G Hard Drive and I am try to test the FreeNAS option to share some disk space on my network.

After the install, I am only able to see a small part of the 350G disk.

Filesystem Size Used Avail Capacity Mounted on
/dev/ufs/FreeNASs1a 927M 357M 496M 42% /
devfs 1.0K 1.0K 0B 100% /dev
/dev/md0 4.6M 1.9M 2.3M 44% /etc
/dev/md1 824K 1.5K 757K 0% /mnt
/dev/md2 149M 4.7M 133M 3% /var
/dev/ufs/FreeNASs4 20M 365K 18M 2% /data

How do I make the rest of the disk available to be shared? thanks in advance.

 

[survive]

Hi Luis,

The short answer is you don't. FreeNAS is meant to be installed on flash, like a compact flash card or a USB "pen" drive.

Read this: http://www.freenas.org/images/resources/freenas8.0.3/freenas8.0.3_guide.html

Section 1.1.3

-Will