QuinZuNiX
Cadet
- Joined
- Jan 19, 2016
- Messages
- 3
Greetings.
This is my first serious NAS that I am planning on building, and I would like to hear some input whether this would be sufficient for my needs.
The NAS will at most be streaming movies to 3 different computers simultaneously (unlikely), and it will be used for general file storage and backup.
The setup I am thinking of going with is as follows:
Case:
Arc Midi R2
http://www.fractal-design.com/home/product/cases/arc-series/arc-midi-r2-solid-side-panel
Motherboard:
X10SLL+-F
http://www.supermicro.com/products/motherboard/Xeon/C220/X10SLL_-F.cfm
CPU:
Xeon E3 1241 V3
http://ark.intel.com/products/80909/Intel-Xeon-Processor-E3-1241-v3-8M-Cache-3_50-GHz
PSU:
Corsair AX760
http://www.corsair.com/en-us/ax760-...-80-plus-platinum-certified-fully-modular-psu
Ram:
2 X 8 GB ECC unbuffered
http://eu.crucial.com/eur/en/ct102472bd160b
HDD:
6 X 4 TB WD RED(Raidz2)
Boot:
2 X SanDisk Ultra Fit - 16GB
Therefore, I have a couple of questions.
I know the PSU is overkill for 6 drives, but I intend to put in a SAS 9211-8i in the x8 slot and upgrade with another 6 drives, and maybe a SSD or two for ZIL or L2ARC if it is needed. Have anybody tried using the x8 slot on the X10SLL+-F? And if so has there been any problems with it?
Does this setup look good enough to last a couple of years now?
Thanks for any and all responses in advance :)
Edit:
Updated specs
This is my first serious NAS that I am planning on building, and I would like to hear some input whether this would be sufficient for my needs.
The NAS will at most be streaming movies to 3 different computers simultaneously (unlikely), and it will be used for general file storage and backup.
The setup I am thinking of going with is as follows:
Case:
Arc Midi R2
http://www.fractal-design.com/home/product/cases/arc-series/arc-midi-r2-solid-side-panel
Motherboard:
X10SLL+-F
http://www.supermicro.com/products/motherboard/Xeon/C220/X10SLL_-F.cfm
CPU:
Xeon E3 1241 V3
http://ark.intel.com/products/80909/Intel-Xeon-Processor-E3-1241-v3-8M-Cache-3_50-GHz
PSU:
Corsair AX760
http://www.corsair.com/en-us/ax760-...-80-plus-platinum-certified-fully-modular-psu
Ram:
2 X 8 GB ECC unbuffered
http://eu.crucial.com/eur/en/ct102472bd160b
HDD:
6 X 4 TB WD RED(Raidz2)
Boot:
2 X SanDisk Ultra Fit - 16GB
Therefore, I have a couple of questions.
I know the PSU is overkill for 6 drives, but I intend to put in a SAS 9211-8i in the x8 slot and upgrade with another 6 drives, and maybe a SSD or two for ZIL or L2ARC if it is needed. Have anybody tried using the x8 slot on the X10SLL+-F? And if so has there been any problems with it?
Does this setup look good enough to last a couple of years now?
Thanks for any and all responses in advance :)
Edit:
Updated specs
Last edited: