flashdrive
Patron
- Joined
- Apr 2, 2021
- Messages
- 264
Hello,
since my TN Core system will be running in idle mode for most of the time I want to have as low as possible of a system power usage.
Here are my current figures:
I know that my 10 GBit HP network card (PCIe) will draw around 10 Watts alone.
Other than that nothing else but the USB thumb drives, 1x 1 GBit LAN, 1x 10 GBit LAN are connected.
I need to check the UEFI setup for
since my TN Core system will be running in idle mode for most of the time I want to have as low as possible of a system power usage.
Here are my current figures:
- 54 Watts for System > UEFI menu entered, no HDDs connected to the PC
- 35 Watts TN Core loaded, idle, no HDDs - same as above
I know that my 10 GBit HP network card (PCIe) will draw around 10 Watts alone.
Other than that nothing else but the USB thumb drives, 1x 1 GBit LAN, 1x 10 GBit LAN are connected.
I need to check the UEFI setup for
- IGPU of the Intel CPU
- CPU values - currently at "Auto"