cookiesowns
Dabbler
- Joined
- Jun 8, 2014
- Messages
- 31
Hi,
So I just got my ZFS box setup.
Hw consists of:
E5-1620v2
24x 4TB 7.2K Deskstar NAS hdd in a 4 vdev 6 drive z2 pool
X9SRH-7TF 10Ge directly connected to a machine running windows 8 and a X540-T2 copper nic.
64GB RAM
3 LSI HBA's all direct attached running R16 firmware
Max performance I've been seeing is around 1.2-2.5gbps single thread CIFS
Iperf is the same at 1.2-1.6gbps. If i increase window size or use parallel tests I can saturate the nic no problem.
Is there any tuning steps I'm missing for cifs or maybe tunables I should try?
The array was about to push 1GB/s in various benchmarks even with pushing the arc to its max.
So I just got my ZFS box setup.
Hw consists of:
E5-1620v2
24x 4TB 7.2K Deskstar NAS hdd in a 4 vdev 6 drive z2 pool
X9SRH-7TF 10Ge directly connected to a machine running windows 8 and a X540-T2 copper nic.
64GB RAM
3 LSI HBA's all direct attached running R16 firmware
Max performance I've been seeing is around 1.2-2.5gbps single thread CIFS
Iperf is the same at 1.2-1.6gbps. If i increase window size or use parallel tests I can saturate the nic no problem.
Is there any tuning steps I'm missing for cifs or maybe tunables I should try?
The array was about to push 1GB/s in various benchmarks even with pushing the arc to its max.
Last edited: