I keep getting ATA errors. I'm not sure if the HDD's are failing, but I keep getting Errors on different drives, but they all Pass SMART test. Also I can't see anything suspicious in the smart reports. Maybe the issue is with the SATA cables, HBA or CPU/Mainboard!? I just replaced the PSU, so that should not be the issue.
My System:
4x 10TB WD Red RAIDZ1
3x 4TB Seagate IronWolf RAIDZ2
Intel Xeon E3-1230 V2
MSI MS-S0121 LGA1155
2x8GB DDR3 ECC Memory (I know, the system could use more)
Corsair RM750x (Brandnew. just replaced my old PSU, thought the Errors might be caused by the previous old PSU)
LSI SAS2008 H310
My System:
4x 10TB WD Red RAIDZ1
3x 4TB Seagate IronWolf RAIDZ2
Intel Xeon E3-1230 V2
MSI MS-S0121 LGA1155
2x8GB DDR3 ECC Memory (I know, the system could use more)
Corsair RM750x (Brandnew. just replaced my old PSU, thought the Errors might be caused by the previous old PSU)
LSI SAS2008 H310
Code:
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p14 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD100EFAX-68LHPN0 Serial Number: 1DGP88BZ LU WWN Device Id: 5 000cca 26cc9aad6 Firmware Version: 83.H0A83 User Capacity: 10,000,831,348,736 bytes [10.0 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Oct 31 13:16:45 2022 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 93) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: (1070) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 094 094 016 Pre-fail Always - 1703936 2 Throughput_Performance 0x0004 130 130 054 Old_age Offline - 108 3 Spin_Up_Time 0x0007 165 165 024 Pre-fail Always - 381 (Average 414) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 3564 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000a 100 100 067 Old_age Always - 0 8 Seek_Time_Performance 0x0004 128 128 020 Old_age Offline - 18 9 Power_On_Hours 0x0012 095 095 000 Old_age Always - 38926 10 Spin_Retry_Count 0x0012 100 100 060 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2955 22 Helium_Level 0x0023 099 099 025 Pre-fail Always - 100 192 Power-Off_Retract_Count 0x0032 096 096 000 Old_age Always - 4999 193 Load_Cycle_Count 0x0012 096 096 000 Old_age Always - 4999 194 Temperature_Celsius 0x0002 138 138 000 Old_age Always - 47 (Min/Max 22/56) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 55 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 55 occurred at disk power-on lifetime: 38926 hours (1621 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 28 a0 e9 b5 40 00 02:59:26.432 READ FPDMA QUEUED 60 b0 00 18 ed b5 40 00 02:59:19.490 READ FPDMA QUEUED 60 b0 08 b8 eb b5 40 00 02:59:19.476 READ FPDMA QUEUED 60 c0 30 a0 ea b5 40 00 02:59:19.356 READ FPDMA QUEUED 60 00 20 a0 e8 b5 40 00 02:59:19.356 READ FPDMA QUEUED Error 54 occurred at disk power-on lifetime: 38926 hours (1621 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 10 20 06 c6 40 00 02:58:53.936 READ FPDMA QUEUED 61 18 28 28 bf 3d 40 00 02:58:47.353 WRITE FPDMA QUEUED 60 88 20 20 08 c6 40 00 02:58:47.009 READ FPDMA QUEUED 60 00 18 20 07 c6 40 00 02:58:47.009 READ FPDMA QUEUED 60 00 08 20 05 c6 40 00 02:58:47.009 READ FPDMA QUEUED Error 53 occurred at disk power-on lifetime: 38926 hours (1621 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 10 20 03 c6 40 00 02:58:46.742 READ FPDMA QUEUED 61 18 40 c8 ba 3d 40 00 02:58:40.153 WRITE FPDMA QUEUED 61 10 50 90 fc 3f 40 00 02:58:39.797 WRITE FPDMA QUEUED 61 10 48 90 fa 3f 40 00 02:58:39.797 WRITE FPDMA QUEUED 61 10 40 90 02 40 40 00 02:58:39.797 WRITE FPDMA QUEUED Error 52 occurred at disk power-on lifetime: 38926 hours (1621 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 e0 38 38 00 c6 40 00 02:58:39.525 READ FPDMA QUEUED 61 18 40 b0 ba 3d 40 00 02:58:32.670 WRITE FPDMA QUEUED 60 00 30 38 ff c5 40 00 02:58:32.566 READ FPDMA QUEUED 60 00 28 38 fe c5 40 00 02:58:32.566 READ FPDMA QUEUED 60 00 20 38 fd c5 40 00 02:58:32.566 READ FPDMA QUEUED Error 51 occurred at disk power-on lifetime: 38926 hours (1621 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 10 f8 ae bb 40 00 02:57:20.485 READ FPDMA QUEUED 60 28 68 88 d6 bb 40 00 02:57:13.320 READ FPDMA QUEUED 60 00 60 88 d5 bb 40 00 02:57:13.320 READ FPDMA QUEUED 60 00 58 88 d4 bb 40 00 02:57:13.320 READ FPDMA QUEUED 60 78 50 68 d2 bb 40 00 02:57:13.320 READ FPDMA QUEUED SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 38914 - # 2 Short offline Completed without error 00% 38889 - # 3 Short offline Completed without error 00% 38865 - # 4 Short offline Completed without error 00% 38841 - # 5 Short offline Completed without error 00% 38817 - # 6 Short offline Completed without error 00% 38799 - # 7 Short offline Completed without error 00% 38775 - # 8 Short offline Completed without error 00% 38751 - # 9 Short offline Completed without error 00% 38727 - #10 Short offline Completed without error 00% 38703 - #11 Short offline Completed without error 00% 38679 - #12 Short offline Completed without error 00% 38655 - #13 Short offline Completed without error 00% 38631 - #14 Short offline Completed without error 00% 38607 - #15 Short offline Completed without error 00% 38583 - #16 Short offline Completed without error 00% 38564 - #17 Short offline Completed without error 00% 38535 - #18 Short offline Completed without error 00% 38511 - #19 Short offline Completed without error 00% 38488 - #20 Short offline Completed without error 00% 38464 - #21 Short offline Completed without error 00% 38440 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.