Hi All,
I have Freenas 8.3-release-p10 running on a HP Microserver N36L, with 5 x 2TB Hitachi 5K3000 drives in Raid-Z
One of the drives failed, which I've just received the replacement for....
While waiting on the replacement, a 2nd drive started to fail; I started to see messages such as..
I shut the server down, and crossed my fingers while waiting for the new drive to arrive.
I have now replaced the first failed drive, with a new drive, hoping the 2nd failing drive will stay alive long enough for me to rebuild the array.
When I power up freenas, when trying to mount local file systems, I get the following messages :
repeated with slightly different numbers each time...
Is there anything I can do to get my data back? or is the 2nd failing drive too far gone.
I have Freenas 8.3-release-p10 running on a HP Microserver N36L, with 5 x 2TB Hitachi 5K3000 drives in Raid-Z
One of the drives failed, which I've just received the replacement for....
While waiting on the replacement, a 2nd drive started to fail; I started to see messages such as..
Device: /dev/ada1, Failed SMART usage Attribute: 5 Reallocated_Sector_Ct.
Device: /dev/ada1, FAILED SMART self-check. BACK UP DATA NOW!
Device: /dev/ada1, failed to read SMART Attribute Data
Device: /dev/ada1, FAILED SMART self-check. BACK UP DATA NOW!
Device: /dev/ada1, failed to read SMART Attribute Data
I shut the server down, and crossed my fingers while waiting for the new drive to arrive.
I have now replaced the first failed drive, with a new drive, hoping the 2nd failing drive will stay alive long enough for me to rebuild the array.
When I power up freenas, when trying to mount local file systems, I get the following messages :
ahcich2: Timeout on slot XX port 0
achich2: is 00000000 cs 00000000 ss 00000000 rs 00000000 tfd 50 00000000 cmd 00000000
achich2: is 00000000 cs 00000000 ss 00000000 rs 00000000 tfd 50 00000000 cmd 00000000
repeated with slightly different numbers each time...
Is there anything I can do to get my data back? or is the 2nd failing drive too far gone.