Ok, I've watched Youtube, read manuals and am beginning to panic. Here's what the alert system says ( red blinking light, top right corner):
=============================================================
Ok, so I'm go to check via the shell:
============================================================
[root@freenas ~]# zpool status -v
pool: freenas-boot
state: ONLINE scan: scrub repaired 0 in 0h57m with 0 errors on Tue Feb 7 04:42:36 2017
config:
NAME STATE READ WRITE CKSUM
freenas-boot ONLINE 0 0 0
gptid/df0f0e99-8074-11e4-b218-001ec9aadb11 ONLINE 0 0 0
errors: No known data errors
pool: volume1
state: ONLINE
scan: scrub repaired 0 in 5h16m with 0 errors on Wed Feb 15 09:16:06 2017
config:
NAME STATE READ WRITE CKSUM
volume1 ONLINE 0 0 0
raidz3-0 ONLINE 0 0 0
gptid/1e13fe7f-1b75-11e4-ab2a-001ec9aadb11 ONLINE 0 0 0
gptid/1e7de006-1b75-11e4-ab2a-001ec9aadb11 ONLINE 0 0 0
gptid/1ef014db-1b75-11e4-ab2a-001ec9aadb11 ONLINE 0 0 0 gptid/1f5ec7bc-1b75-11e4-ab2a-001ec9aadb11 ONLINE 0 0 0
gptid/1fd498da-1b75-11e4-ab2a-001ec9aadb11 ONLINE 0 0 0
gptid/2043e8b7-1b75-11e4-ab2a-001ec9aadb11 ONLINE 0 0 0
gptid/20b59400-1b75-11e4-ab2a-001ec9aadb11 ONLINE 0 0 0
errors: No known data errors
[root@freenas ~]#
============================================================
No errors? Everything is online??? What do I do now? This is FreeNAS-9.10.2-U1 (86c7ef5). Ok, I'm an idiot, but one with two drives bad(?) and a pair of drives ready to replace them. What do I do? What do I read?
Hangs head in shame, and hits create thread ....
=============================================================
- WARNING: Feb. 23, 2017, 8:53 a.m. - Firmware version 16 does not match driver version 21 for /dev/mps0. Please flash controller to P21 IT firmware.
- CRITICAL: Feb. 23, 2017, 8:53 a.m. - Device: /dev/da2 [SAT], 1344 Currently unreadable (pending) sectors
- CRITICAL: Feb. 23, 2017, 8:53 a.m. - Device: /dev/da2 [SAT], 1344 Offline uncorrectable sectors
- CRITICAL: Feb. 23, 2017, 8:53 a.m. - Device: /dev/da0 [SAT], 120 Currently unreadable (pending) sectors
- CRITICAL: Feb. 23, 2017, 8:53 a.m. - Device: /dev/da0 [SAT], 120 Offline uncorrectable sectors
Ok, so I'm go to check via the shell:
============================================================
[root@freenas ~]# zpool status -v
pool: freenas-boot
state: ONLINE scan: scrub repaired 0 in 0h57m with 0 errors on Tue Feb 7 04:42:36 2017
config:
NAME STATE READ WRITE CKSUM
freenas-boot ONLINE 0 0 0
gptid/df0f0e99-8074-11e4-b218-001ec9aadb11 ONLINE 0 0 0
errors: No known data errors
pool: volume1
state: ONLINE
scan: scrub repaired 0 in 5h16m with 0 errors on Wed Feb 15 09:16:06 2017
config:
NAME STATE READ WRITE CKSUM
volume1 ONLINE 0 0 0
raidz3-0 ONLINE 0 0 0
gptid/1e13fe7f-1b75-11e4-ab2a-001ec9aadb11 ONLINE 0 0 0
gptid/1e7de006-1b75-11e4-ab2a-001ec9aadb11 ONLINE 0 0 0
gptid/1ef014db-1b75-11e4-ab2a-001ec9aadb11 ONLINE 0 0 0 gptid/1f5ec7bc-1b75-11e4-ab2a-001ec9aadb11 ONLINE 0 0 0
gptid/1fd498da-1b75-11e4-ab2a-001ec9aadb11 ONLINE 0 0 0
gptid/2043e8b7-1b75-11e4-ab2a-001ec9aadb11 ONLINE 0 0 0
gptid/20b59400-1b75-11e4-ab2a-001ec9aadb11 ONLINE 0 0 0
errors: No known data errors
[root@freenas ~]#
============================================================
No errors? Everything is online??? What do I do now? This is FreeNAS-9.10.2-U1 (86c7ef5). Ok, I'm an idiot, but one with two drives bad(?) and a pair of drives ready to replace them. What do I do? What do I read?
Hangs head in shame, and hits create thread ....