Hi All, This is my first foray into FreeNAS. I built a machine from my old workstation which was ultra stable. It's an Intel DX38BT board, Q9550, 8gb, (6) 1TB Barracudas plugged directly into mobo sata ports, OS on a flash drive plugged into mobo I/O usb 2.0 port. It's running 8.3.0 x64. I have the 6 HDDs configured as a RaidZ2. The system boots fine and seems to function fine, but randomly freezes/dies. Sometimes the directly attached monitor goes blank with only a flashing cursor on the bottom left, sometimes it still shows the menu (option 1-11) but is totally unresponsive (directly and web GUI). The only way out is to power off and reboot. Any thoughts?