Hi there, I'm having an issue with Emby not loading the GPU I have installed. I'm running the Emby Official app and Scale is seeing the GPU I have allocated through the setup process. My issue is Emby is not recognizing it and is giving me this error when I check Emby's Hardware Logs. I've run the nvidia-smi and it sees the card installed but no processes are being leveraged on it. I've attached the log that Emby has that shows the GPU is detected but is failing to load. Is this a driver issue, or something else? I've tried to change some things in my BIOS to fix it per some other threads, reinstalled the app, and poured through the forums for a few days now and can't seem to find a fix for my issue. Any help is greatly appreciated.
"ProgramVersion": {
"Version": "5.0.0-emby_2022_05_27-u1",
"Copyright": "Copyright (c) 2018-2022 softworkz for Emby Llc",
"Compiler": "gcc 8.3.0 (crosstool-NG 1.24.0)",
"Configuration": "--cc=x86_64-emby-linux-gnu-gcc --prefix=/home/embybuilder/Buildbot/x64/ffmpeg-x64/staging --disable-alsa --disable-debug --disable-doc --disable-ffplay --disable-libpulse --disable-libxcb --disable-vdpau --disable-xlib --enable-chromaprint --enable-fontconfig --enable-gnutls --enable-gpl --enable-iconv --enable-libaribb24 --enable-libass --enable-libdav1d --enable-libfreetype --enable-libfribidi --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libzvbi --enable-pic --enable-version3 --enable-libtesseract --enable-cuda-llvm --enable-cuvid --enable-libdrm --enable-libmfx --enable-nvdec --enable-nvenc --enable-vaapi --enable-opencl --enable-cross-compile --cross-prefix=x86_64-emby-linux-gnu- --arch=x86_64 --target-os=linux --enable-shared --disable-static --pkg-config=pkg-config --pkg-config-flags=--static --extra-libs='-lm -lstdc++ -pthread'"
},
"Devices": [
{
"DeviceIndex": 0,
"DeviceInfo": {
"VendorName": "NVIDIA Corporation",
"DeviceName": "GM107GL [Quadro K1200]",
"SubsytemVendorName": "Hewlett-Packard Company",
"VendorId": 4318,
"DeviceId": 5052,
"SubsytemVendorId": 4156,
"SubsytemDeviceId": 4416,
"DevPath": "/sys/bus/pci/devices/0000:0f:00.0",
"DrmCard": "/dev/dri/card0",
"DrmRender": "/dev/dri/renderD128",
"IsEnabled": 1,
"IsBootVga": 1,
"Error": {
"Number": -1,
"Message": "Failed to open the drm device /dev/dri/renderD128"
}
}
}
],
"Log": [
{
"Level": 40,
"Category": 0,
"Message": "Found 50 device entries"
}
]
}
"Version": "5.0.0-emby_2022_05_27-u1",
"Copyright": "Copyright (c) 2018-2022 softworkz for Emby Llc",
"Compiler": "gcc 8.3.0 (crosstool-NG 1.24.0)",
"Configuration": "--cc=x86_64-emby-linux-gnu-gcc --prefix=/home/embybuilder/Buildbot/x64/ffmpeg-x64/staging --disable-alsa --disable-debug --disable-doc --disable-ffplay --disable-libpulse --disable-libxcb --disable-vdpau --disable-xlib --enable-chromaprint --enable-fontconfig --enable-gnutls --enable-gpl --enable-iconv --enable-libaribb24 --enable-libass --enable-libdav1d --enable-libfreetype --enable-libfribidi --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libzvbi --enable-pic --enable-version3 --enable-libtesseract --enable-cuda-llvm --enable-cuvid --enable-libdrm --enable-libmfx --enable-nvdec --enable-nvenc --enable-vaapi --enable-opencl --enable-cross-compile --cross-prefix=x86_64-emby-linux-gnu- --arch=x86_64 --target-os=linux --enable-shared --disable-static --pkg-config=pkg-config --pkg-config-flags=--static --extra-libs='-lm -lstdc++ -pthread'"
},
"Devices": [
{
"DeviceIndex": 0,
"DeviceInfo": {
"VendorName": "NVIDIA Corporation",
"DeviceName": "GM107GL [Quadro K1200]",
"SubsytemVendorName": "Hewlett-Packard Company",
"VendorId": 4318,
"DeviceId": 5052,
"SubsytemVendorId": 4156,
"SubsytemDeviceId": 4416,
"DevPath": "/sys/bus/pci/devices/0000:0f:00.0",
"DrmCard": "/dev/dri/card0",
"DrmRender": "/dev/dri/renderD128",
"IsEnabled": 1,
"IsBootVga": 1,
"Error": {
"Number": -1,
"Message": "Failed to open the drm device /dev/dri/renderD128"
}
}
}
],
"Log": [
{
"Level": 40,
"Category": 0,
"Message": "Found 50 device entries"
}
]
}