benitowarez
Cadet
- Joined
- Mar 17, 2023
- Messages
- 3
I have been working on buiding this server for several weeks now, and I am in need of assistance from more knowledgeable people than myself.
Background: I am using a Dell R420 with the Perc H310 configured in non-raid. I have 1 SAS drive in bay 0 with Truenas installed and 2 TB Red WD SSD's in bays 1-4. This is intended to give a total pool size of 5TB+ in a Raid-z. The issues I am having is getting the pool to configure without errors. When I set up the pool I get a slew of hard error cmd=read fsb XXXXXX for each drive multiple times. Then Truenas stops responding from the web ui. I am in desperate need of help/guidance on how to proceed. Are these drives all bad? Did I set this up poorly? The last thing I want to do is set these up in a hardware raid instead of having Truenas manage it properly.
The original pool was comprised of 4 600 GB SAS drives without issue. The original bays are being used with the SSDs, and I believe the server hardware is not faulty given that information. A screenshot of the errors are below for reference.
Background: I am using a Dell R420 with the Perc H310 configured in non-raid. I have 1 SAS drive in bay 0 with Truenas installed and 2 TB Red WD SSD's in bays 1-4. This is intended to give a total pool size of 5TB+ in a Raid-z. The issues I am having is getting the pool to configure without errors. When I set up the pool I get a slew of hard error cmd=read fsb XXXXXX for each drive multiple times. Then Truenas stops responding from the web ui. I am in desperate need of help/guidance on how to proceed. Are these drives all bad? Did I set this up poorly? The last thing I want to do is set these up in a hardware raid instead of having Truenas manage it properly.
The original pool was comprised of 4 600 GB SAS drives without issue. The original bays are being used with the SSDs, and I believe the server hardware is not faulty given that information. A screenshot of the errors are below for reference.