My zpool is degraded and I can't get into the GUI anymore. That is - I see the 'right side' of the GUI, but the left side nevers fully loads. The system seems to boot properly and loads two plugins but then gets stuck on a second. There seems to be a certain period during the bootup process when I can still get into the full GUI (also left) and start a shell. When I then do a zpool status I see that 2 of my four disks are UNAVAIL. IT also resilvers sthg, but when that is done, I still can't get into the system. When I reboot, it just starts resilvering again.
Any ideas about what I can do? It still somehow sees the 1.34 T that are (kind of) important to me (although I do have backups that I could get back onto the NAS if need be).
Thanks!
-Stephan
Code:
scan: resilver in progress since Tue Mar 11 03:45:17 2014 55.7G scanned out of 1.34T at 190M/s, 1h58m to go 90.1M resilvered, 4.06% done config: NAME STATE READ WRITE CKS UM StephanNAS DEGRADED 1 0 0 mirror-0 DEGRADED 2 0 0 9124370631216349259 UNAVAIL 0 0 0 was /dev/gptid/d65eb91c-5201-11e2-87a9-3085a943b0e3 gptid/d6bde0bf-5201-11e2-87a9-3085a943b0e3 ONLINE 0 0 2 (resilvering) mirror-1 DEGRADED 0 0 0 gptid/ebe6f24f-59ae-11e3-a143-3085a943b0e3 ONLINE 0 0 0 11534118553952820132 UNAVAIL 0 0 0 was /dev/gptid/98526e0f-526e-11e2-bbec-3085a943b0e3 errors: 14 data errors, use '-v' for a list [root@freenas ~]#
Any ideas about what I can do? It still somehow sees the 1.34 T that are (kind of) important to me (although I do have backups that I could get back onto the NAS if need be).
Thanks!
-Stephan