All FreeNAS Plugins stopped and will not start

Status
Not open for further replies.
F

frozn00

Explorer
Joined
Dec 18, 2014
Messages
57
I am running FreeNAS-9.10.2-U5. Problem was present while running FreeNAS-9.10.2-U1 so I upgraded to U5 but that did not fix my plugins. Plugins won't start and not sure what to do. Here are some logs if anyone would like to help me. Thank you! I am running CouchPotato, SickRage, Sabnzbd and PlexMediaServer. No plugin will start. Any help is very appreciated! I realize this is a long paste and I will edit it to the exact error if I can figure out what is wrong so its not so much to read. All plugins are in the same jail and the pbis were uploaded directly to it.
Code:
Jun 12 22:37:45 freenas python: dnssd_clientstub ConnectToServer: connect() failed path:/var/run/mdnsd Socket:4 Err:-1 Errno:61 Connection refused
Jun 12 22:37:45 freenas python: dnssd_clientstub ConnectToServer: connect() failed path:/var/run/mdnsd Socket:7 Err:-1 Errno:61 Connection refused
Jun 12 22:37:45 freenas python: dnssd_clientstub ConnectToServer: connect() failed path:/var/run/mdnsd Socket:6 Err:-1 Errno:61 Connection refused
Jun 12 22:37:46 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 1
Jun 12 22:37:46 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 1
Jun 12 22:37:46 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 1
Jun 12 22:37:47 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 2
Jun 12 22:37:47 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 2
Jun 12 22:37:47 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 2
Jun 12 22:37:48 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 3
Jun 12 22:37:48 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 3
Jun 12 22:37:48 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 3
Jun 12 22:37:49 freenas python: dnssd_clientstub ConnectToServer: connect() failed path:/var/run/mdnsd Socket:4 Err:-1 Errno:61 Connection refused
Jun 12 22:37:49 freenas python: dnssd_clientstub ConnectToServer: connect() failed path:/var/run/mdnsd Socket:7 Err:-1 Errno:61 Connection refused
Jun 12 22:37:49 freenas python: dnssd_clientstub ConnectToServer: connect() failed path:/var/run/mdnsd Socket:6 Err:-1 Errno:61 Input/output error
Jun 12 22:37:50 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 1
Jun 12 22:37:50 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 1
Jun 12 22:37:50 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 1
Jun 12 22:37:51 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 2
Jun 12 22:37:51 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 2
Jun 12 22:37:51 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 2
Jun 12 22:37:52 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 3
Jun 12 22:37:52 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 3
Jun 12 22:37:52 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 3
Jun 12 22:37:53 freenas python: dnssd_clientstub ConnectToServer: connect() failed path:/var/run/mdnsd Socket:7 Err:-1 Errno:61 Connection refused
Jun 12 22:37:53 freenas python: dnssd_clientstub ConnectToServer: connect() failed path:/var/run/mdnsd Socket:6 Err:-1 Errno:61 Input/output error
Jun 12 22:37:53 freenas python: dnssd_clientstub ConnectToServer: connect() failed path:/var/run/mdnsd Socket:4 Err:-1 Errno:61 Input/output error
Jun 12 22:37:54 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 1
Jun 12 22:37:54 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 1
Jun 12 22:37:54 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 1
Jun 12 22:37:55 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 2
Jun 12 22:37:55 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 2
Jun 12 22:37:55 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 2
Jun 12 22:37:56 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 3
Jun 12 22:37:56 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 3
Jun 12 22:37:56 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 3
Jun 12 22:37:57 freenas python: dnssd_clientstub ConnectToServer: connect() failed path:/var/run/mdnsd Socket:6 Err:-1 Errno:61 Connection refused
Jun 12 22:37:57 freenas python: dnssd_clientstub ConnectToServer: connect() failed path:/var/run/mdnsd Socket:7 Err:-1 Errno:61 Input/output error
Jun 12 22:37:57 freenas python: dnssd_clientstub ConnectToServer: connect() failed path:/var/run/mdnsd Socket:4 Err:-1 Errno:61 Input/output error
Jun 12 22:37:59 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 1
Jun 12 22:37:59 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 1
Jun 12 22:37:59 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 1
Jun 12 22:38:00 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 2
Jun 12 22:38:00 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 2
Jun 12 22:38:00 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 2
Jun 12 22:38:01 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 3
Jun 12 22:38:01 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 3
Jun 12 22:38:01 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 3
Jun 12 22:38:02 freenas python: dnssd_clientstub ConnectToServer: connect() failed path:/var/run/mdnsd Socket:4 Err:-1 Errno:61 Connection refused
Jun 12 22:38:02 freenas python: dnssd_clientstub ConnectToServer: connect() failed path:/var/run/mdnsd Socket:7 Err:-1 Errno:61 Connection refused
Jun 12 22:38:02 freenas python: dnssd_clientstub ConnectToServer: connect() failed path:/var/run/mdnsd Socket:6 Err:-1 Errno:61 Input/output error
Jun 12 22:38:03 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 1
Jun 12 22:38:03 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 1
Jun 12 22:38:03 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 1
Jun 12 22:38:04 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 2
Jun 12 22:38:04 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 2
Jun 12 22:38:04 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 2
Jun 12 22:38:05 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 3
Jun 12 22:38:05 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 3
Jun 12 22:38:05 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 3
Jun 12 22:38:06 freenas python: dnssd_clientstub ConnectToServer: connect() failed path:/var/run/mdnsd Socket:6 Err:-1 Errno:61 Connection refused
Jun 12 22:38:06 freenas python: dnssd_clientstub ConnectToServer: connect() failed path:/var/run/mdnsd Socket:4 Err:-1 Errno:61 Connection refused
Jun 12 22:38:06 freenas python: dnssd_clientstub ConnectToServer: connect() failed path:/var/run/mdnsd Socket:7 Err:-1 Errno:61 Connection refused
Jun 12 22:38:07 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 1
Jun 12 22:38:07 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 1
Jun 12 22:38:07 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 1
Jun 12 22:38:08 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 2
Jun 12 22:38:08 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 2
Jun 12 22:38:08 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 2
Jun 12 22:38:09 freenas syslog-ng[81394]: syslog-ng shutting down; version='3.6.4'
Jun 12 22:57:22 freenas syslog-ng[1344]: syslog-ng starting up; version='3.6.4'
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Jun 12 22:57:22 freenas random: <Software, Yarrow> initialized
Jun 12 22:57:22 freenas WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
Jun 12 22:57:22 freenas ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20160527/tbfadt-650)
Jun 12 22:57:22 freenas ioapic0 <Version 2.1> irqs 0-23 on motherboard
Jun 12 22:57:22 freenas kbd1 at kbdmux0
Jun 12 22:57:22 freenas aesni0: No AESNI support.
Jun 12 22:57:22 freenas padlock0: No ACE support.
Jun 12 22:57:22 freenas cryptosoft0: <software crypto> on motherboard
Jun 12 22:57:22 freenas acpi0: <HP ProLiant> on motherboard
Jun 12 22:57:22 freenas acpi0: Power Button (fixed)
Jun 12 22:57:22 freenas cpu0: <ACPI CPU> on acpi0
Jun 12 22:57:22 freenas cpu1: <ACPI CPU> on acpi0
Jun 12 22:57:22 freenas attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Jun 12 22:57:22 freenas Timecounter "i8254" frequency 1193182 Hz quality 0
Jun 12 22:57:22 freenas Event timer "i8254" frequency 1193182 Hz quality 100
Jun 12 22:57:22 freenas atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Jun 12 22:57:22 freenas Event timer "RTC" frequency 32768 Hz quality 0
Jun 12 22:57:22 freenas hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Jun 12 22:57:22 freenas Timecounter "HPET" frequency 14318180 Hz quality 950
Jun 12 22:57:22 freenas Event timer "HPET" frequency 14318180 Hz quality 550
Jun 12 22:57:22 freenas Event timer "HPET1" frequency 14318180 Hz quality 450
Jun 12 22:57:22 freenas Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
Jun 12 22:57:22 freenas acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
Jun 12 22:57:22 freenas pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Jun 12 22:57:22 freenas pci0: <ACPI PCI bus> on pcib0
Jun 12 22:57:22 freenas pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
Jun 12 22:57:22 freenas pci1: <ACPI PCI bus> on pcib1
Jun 12 22:57:22 freenas vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xf0000000-0xf7ffffff,0xfe8f0000-0xfe8fffff,0xfe700000-0xfe7fffff irq 18 at device 5.0 on pci1
Jun 12 22:57:22 freenas vgapci0: Boot video device
Jun 12 22:57:22 freenas pcib2: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
Jun 12 22:57:22 freenas pci2: <ACPI PCI bus> on pcib2
Jun 12 22:57:22 freenas bge0: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem 0xfe9f0000-0xfe9fffff irq 18 at device 0.0 on pci2
Jun 12 22:57:22 freenas bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E
Jun 12 22:57:22 freenas miibus0: <MII bus> on bge0
Jun 12 22:57:22 freenas brgphy0: <BCM5784 10/100/1000baseT PHY> PHY 1 on miibus0
Jun 12 22:57:22 freenas brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
Jun 12 22:57:22 freenas bge0: Using defaults for TSO: 65518/35/2048
Jun 12 22:57:22 freenas bge0: Ethernet address: 00:9c:02:a0:44:34
Jun 12 22:57:22 freenas ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xd000-0xd007,0xc000-0xc003,0xb000-0xb007,0xa000-0xa003,0x9000-0x900f mem 0xfe6ffc00-0xfe6fffff irq 19 at device 17.0 on pci0
Jun 12 22:57:22 freenas ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier supported
Jun 12 22:57:22 freenas ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
Jun 12 22:57:22 freenas ahcich0: <AHCI channel> at channel 0 on ahci0
Jun 12 22:57:22 freenas ahcich1: <AHCI channel> at channel 1 on ahci0
Jun 12 22:57:22 freenas ahcich2: <AHCI channel> at channel 2 on ahci0
Jun 12 22:57:22 freenas ahcich3: <AHCI channel> at channel 3 on ahci0
Jun 12 22:57:22 freenas ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe6fe000-0xfe6fefff irq 18 at device 18.0 on pci0
Jun 12 22:57:22 freenas usbus0 on ohci0
Jun 12 22:57:22 freenas ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe6ff800-0xfe6ff8ff irq 17 at device 18.2 on pci0
Jun 12 22:57:22 freenas usbus1: EHCI version 1.0
Jun 12 22:57:22 freenas usbus1 on ehci0
Jun 12 22:57:22 freenas ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe6fd000-0xfe6fdfff irq 18 at device 19.0 on pci0
Jun 12 22:57:22 freenas usbus2 on ohci1
Jun 12 22:57:22 freenas ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe6ff400-0xfe6ff4ff irq 17 at device 19.2 on pci0
Jun 12 22:57:22 freenas usbus3: EHCI version 1.0
Jun 12 22:57:22 freenas usbus3 on ehci1
Jun 12 22:57:22 freenas atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
Jun 12 22:57:22 freenas ata0: <ATA channel> at channel 0 on atapci0
Jun 12 22:57:22 freenas ata1: <ATA channel> at channel 1 on atapci0
Jun 12 22:57:22 freenas isab0: <PCI-ISA bridge> at device 20.3 on pci0
Jun 12 22:57:22 freenas isa0: <ISA bus> on isab0
Jun 12 22:57:22 freenas pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
Jun 12 22:57:22 freenas pci3: <ACPI PCI bus> on pcib3
Jun 12 22:57:22 freenas ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe6fc000-0xfe6fcfff irq 18 at device 22.0 on pci0
Jun 12 22:57:22 freenas usbus4 on ohci2
Jun 12 22:57:22 freenas ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe6ff000-0xfe6ff0ff irq 17 at device 22.2 on pci0
Jun 12 22:57:22 freenas usbus5: EHCI version 1.0
Jun 12 22:57:22 freenas usbus5 on ehci2
Jun 12 22:57:22 freenas amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4
Jun 12 22:57:22 freenas acpi_button0: <Power Button> on acpi0
Jun 12 22:57:22 freenas amdsbwd0: <AMD SB8xx/SB9xx/Axx Watchdog Timer> at iomem 0xfec000f0-0xfec000f3,0xfec000f4-0xfec000f7 on isa0
Jun 12 22:57:22 freenas sc0: <System console> at flags 0x100 on isa0
Jun 12 22:57:22 freenas sc0: VGA <16 virtual consoles, flags=0x300>
Jun 12 22:57:22 freenas vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Jun 12 22:57:22 freenas hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Jun 12 22:57:22 freenas random: unblocking device.
Jun 12 22:57:22 freenas usbus0: 12Mbps Full Speed USB v1.0
Jun 12 22:57:22 freenas usbus1: 480Mbps High Speed USB v2.0
Jun 12 22:57:22 freenas usbus2: 12Mbps Full Speed USB v1.0
Jun 12 22:57:22 freenas usbus3: 480Mbps High Speed USB v2.0
Jun 12 22:57:22 freenas usbus4: 12Mbps Full Speed USB v1.0
Jun 12 22:57:22 freenas usbus5: 480Mbps High Speed USB v2.0
Jun 12 22:57:22 freenas ZFS filesystem version: 5
Jun 12 22:57:22 freenas ZFS storage pool version: features support (5000)
Jun 12 22:57:22 freenas Timecounters tick every 1.000 msec
Jun 12 22:57:22 freenas ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
Jun 12 22:57:22 freenas ugen5.1: <ATI> at usbus5
Jun 12 22:57:22 freenas uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
Jun 12 22:57:22 freenas ugen4.1: <ATI> at usbus4
Jun 12 22:57:22 freenas uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
Jun 12 22:57:22 freenas ugen3.1: <ATI> at usbus3
Jun 12 22:57:22 freenas uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
Jun 12 22:57:22 freenas ugen2.1: <ATI> at usbus2
Jun 12 22:57:22 freenas uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
Jun 12 22:57:22 freenas ugen1.1: <ATI> at usbus1
Jun 12 22:57:22 freenas uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
Jun 12 22:57:22 freenas ugen0.1: <ATI> at usbus0
Jun 12 22:57:22 freenas uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Jun 12 22:57:22 freenas uhub1: 4 ports with 4 removable, self powered
Jun 12 22:57:22 freenas uhub3: 5 ports with 5 removable, self powered
Jun 12 22:57:22 freenas uhub5: 5 ports with 5 removable, self powered
Jun 12 22:57:22 freenas uhub0: 4 ports with 4 removable, self powered
Jun 12 22:57:22 freenas uhub2: 5 ports with 5 removable, self powered
Jun 12 22:57:22 freenas uhub4: 5 ports with 5 removable, self powered
Jun 12 22:57:22 freenas ugen0.2: <vendor 0x0b38> at usbus0
Jun 12 22:57:22 freenas ukbd0: <vendor 0x0b38 product 0x0010, class 0/0, rev 1.10/1.02, addr 2> on usbus0
Jun 12 22:57:22 freenas kbd0 at ukbd0
Jun 12 22:57:22 freenas ugen3.2: <SanDisk> at usbus3
Jun 12 22:57:22 freenas umass0: <SanDisk Cruzer Fit, class 0/0, rev 2.10/1.00, addr 2> on usbus3
Jun 12 22:57:22 freenas umass0:  SCSI over Bulk-Only; quirks = 0xc100
Jun 12 22:57:22 freenas umass0:7:0:-1: Attached to scbus7
Jun 12 22:57:22 freenas ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Jun 12 22:57:22 freenas ada0: <WDC WD30EFRX-68EUZN0 80.00A80> ACS-2 ATA SATA 3.x device
Jun 12 22:57:22 freenas ada0: Serial Number WD-WMC4N0793924
Jun 12 22:57:22 freenas ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Jun 12 22:57:22 freenas ada0: Command Queueing enabled
Jun 12 22:57:22 freenas ada0: 2861588MB (5860533168 512 byte sectors)
Jun 12 22:57:22 freenas ada0: quirks=0x1<4K>
Jun 12 22:57:22 freenas ada0: Previously was known as ad4
Jun 12 22:57:22 freenas ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
Jun 12 22:57:22 freenas ada1: <WDC WD30EFRX-68EUZN0 82.00A82> ACS-2 ATA SATA 3.x device
Jun 12 22:57:22 freenas ada1: Serial Number WD-WCC4N3HC8S3T
Jun 12 22:57:22 freenas ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Jun 12 22:57:22 freenas ada1: Command Queueing enabled
Jun 12 22:57:22 freenas ada1: 2861588MB (5860533168 512 byte sectors)
Jun 12 22:57:22 freenas ada1: quirks=0x1<4K>
Jun 12 22:57:22 freenas ada1: Previously was known as ad6
Jun 12 22:57:22 freenas ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
Jun 12 22:57:22 freenas ada2: <WDC WD30EFRX-68EUZN0 82.00A82> ACS-2 ATA SATA 3.x device
Jun 12 22:57:22 freenas ada2: Serial Number WD-WCC4N6ZDP7R6
Jun 12 22:57:22 freenas ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Jun 12 22:57:22 freenas ada2: Command Queueing enabled
Jun 12 22:57:22 freenas ada2: 2861588MB (5860533168 512 byte sectors)
Jun 12 22:57:22 freenas ada2: quirks=0x1<4K>
Jun 12 22:57:22 freenas ada2: Previously was known as ad8
Jun 12 22:57:22 freenas ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
Jun 12 22:57:22 freenas ada3: <WDC WD30EFRX-68EUZN0 80.00A80> ACS-2 ATA SATA 3.x device
Jun 12 22:57:22 freenas ada3: Serial Number WD-WMC4N2934444
Jun 12 22:57:22 freenas ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Jun 12 22:57:22 freenas ada3: Command Queueing enabled
Jun 12 22:57:22 freenas ada3: 2861588MB (5860533168 512 byte sectors)
Jun 12 22:57:22 freenas ada3: quirks=0x1<4K>
Jun 12 22:57:22 freenas ada3: Previously was known as ad10
Jun 12 22:57:22 freenas da0 at umass-sim0 bus 0 scbus7 target 0 lun 0
Jun 12 22:57:22 freenas da0: <SanDisk Cruzer Fit 1.00> Removable Direct Access SPC-4 SCSI device
Jun 12 22:57:22 freenas da0: Serial Number 4C530001050809110312
Jun 12 22:57:22 freenas da0: 40.000MB/s transfers
Jun 12 22:57:22 freenas da0: 30528MB (62521344 512 byte sectors)
Jun 12 22:57:22 freenas da0: quirks=0x2<NO_6_BYTE>
Jun 12 22:57:22 freenas SMP: AP CPU #1 Launched!
Jun 12 22:57:22 freenas Timecounter "TSC" frequency 1497537535 Hz quality 800
Jun 12 22:57:22 freenas Trying to mount root from zfs:freenas-boot/ROOT/default-20170613-024846 []...
Jun 12 22:57:22 freenas GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev f91e28e40bf7)
Jun 12 22:57:22 freenas ipmi0: <IPMI System Interface> on isa0
Jun 12 22:57:22 freenas ipmi0: KCS mode found at mem 0x0 alignment 0x1 on isa
Jun 12 22:57:22 freenas ipmi0: couldn't configure I/O resource
Jun 12 22:57:22 freenas device_attach: ipmi0 attach returned 6
Jun 12 22:57:22 freenas hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> K8/4/48/0x1ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA>
Jun 12 22:57:22 freenas kernel: bge0: link state changed to DOWN
Jun 12 22:57:22 freenas kernel: bge0: link state changed to DOWN
Jun 12 22:57:22 freenas uhid0: <vendor 0x0b38 product 0x0010, class 0/0, rev 1.10/1.02, addr 2> on usbus0
Jun 12 22:57:22 freenas kernel: bge0: link state changed to UP
Jun 12 22:57:22 freenas kernel: bge0: link state changed to UP
Jun 12 22:57:24 freenas GEOM_ELI: Device ada0p1.eli created.
Jun 12 22:57:24 freenas GEOM_ELI: Encryption: AES-XTS 128
Jun 12 22:57:24 freenas GEOM_ELI:	 Crypto: software
Jun 12 22:57:24 freenas GEOM_ELI: Device ada1p1.eli created.
Jun 12 22:57:24 freenas GEOM_ELI: Encryption: AES-XTS 128
Jun 12 22:57:24 freenas GEOM_ELI:	 Crypto: software
Jun 12 22:57:24 freenas GEOM_ELI: Device ada2p1.eli created.
Jun 12 22:57:24 freenas GEOM_ELI: Encryption: AES-XTS 128
Jun 12 22:57:24 freenas GEOM_ELI:	 Crypto: software
Jun 12 22:57:24 freenas GEOM_ELI: Device ada3p1.eli created.
Jun 12 22:57:24 freenas GEOM_ELI: Encryption: AES-XTS 128
Jun 12 22:57:24 freenas GEOM_ELI:	 Crypto: software
Jun 12 22:57:25 freenas ntpd[1764]: ntpd 4.2.8p9-a (1): Starting
Jun 12 22:57:27 freenas proftpd[1915]: 127.0.0.1 - ProFTPD 1.3.5a (maint) (built Thu Jun 8 2017 20:12:35 UTC) standalone mode STARTUP
Jun 12 22:57:30 freenas smbd: dnssd_clientstub ConnectToServer: connect()-> No of tries: 1
Jun 12 22:57:30 freenas root: /etc/rc: WARNING: failed precmd routine for vmware_guestd
Jun 12 22:57:31 freenas smbd: dnssd_clientstub ConnectToServer: connect()-> No of tries: 2
Jun 12 22:57:32 freenas smbd: dnssd_clientstub ConnectToServer: connect()-> No of tries: 3
Jun 12 22:57:33 freenas smbd: dnssd_clientstub ConnectToServer: connect() failed path:/var/run/mdnsd Socket:35 Err:-1 Errno:2 No such file or directory
Jun 12 22:57:41 freenas alert.py: [common.pipesubr:66] Popen()ing: /usr/local/sbin/dmidecode -s system-product-name
Jun 12 22:57:41 freenas alert.py: [common.pipesubr:66] Popen()ing: /usr/local/sbin/dmidecode -s baseboard-product-name
Jun 12 22:57:42 freenas alert.py: [freenasOS.Update:1572] Cached sequence, 1e055f208642fd566b9f569d31cd01a9, does not match system sequence, 3c693eb3ffa689371074d2ddaab93d59
Jun 12 22:57:42 freenas alert.py: [freenasOS.Update:1114] Cached sequence does not match system sequence
Jun 12 22:57:51 freenas bridge0: Ethernet address: 02:6e:e0:51:be:00
Jun 12 22:57:51 freenas kernel: bridge0: link state changed to UP
Jun 12 22:57:51 freenas kernel: bridge0: link state changed to UP
Jun 12 22:57:51 freenas kernel: bge0: promiscuous mode enabled
Jun 12 22:57:51 freenas epair0a: Ethernet address: 02:ff:60:00:04:0a
Jun 12 22:57:51 freenas epair0b: Ethernet address: 02:ff:b0:00:05:0b
Jun 12 22:57:51 freenas kernel: epair0a: link state changed to UP
Jun 12 22:57:51 freenas kernel: epair0a: link state changed to UP
Jun 12 22:57:51 freenas kernel: epair0b: link state changed to UP
Jun 12 22:57:51 freenas kernel: epair0b: link state changed to UP
Jun 12 22:57:51 freenas kernel: epair0a: promiscuous mode enabled
Jun 12 22:57:51 freenas kernel: ng_ether_ifnet_arrival_event: can't re-name node epair0b
Jun 12 22:57:51 freenas kernel: ng_ether_ifnet_arrival_event: can't re-name node epair0b
Jun 12 22:58:00 freenas epair1a: Ethernet address: 02:ff:60:00:05:0a
Jun 12 22:58:00 freenas epair1b: Ethernet address: 02:ff:b0:00:06:0b
Jun 12 22:58:00 freenas kernel: epair1a: link state changed to UP
Jun 12 22:58:00 freenas kernel: epair1a: link state changed to UP
Jun 12 22:58:00 freenas kernel: epair1b: link state changed to UP
Jun 12 22:58:00 freenas kernel: epair1b: link state changed to UP
Jun 12 22:58:00 freenas kernel: epair1a: promiscuous mode enabled
Jun 12 22:58:00 freenas kernel: ng_ether_ifnet_arrival_event: can't re-name node epair1b
Jun 12 22:58:00 freenas kernel: ng_ether_ifnet_arrival_event: can't re-name node epair1b
Jun 12 22:58:11 freenas epair2a: Ethernet address: 02:ff:60:00:06:0a
Jun 12 22:58:11 freenas epair2b: Ethernet address: 02:ff:b0:00:07:0b
Jun 12 22:58:11 freenas kernel: epair2a: link state changed to UP
Jun 12 22:58:11 freenas kernel: epair2a: link state changed to UP
Jun 12 22:58:11 freenas kernel: epair2b: link state changed to UP
Jun 12 22:58:11 freenas kernel: epair2b: link state changed to UP
Jun 12 22:58:11 freenas kernel: epair2a: promiscuous mode enabled
Jun 12 22:58:11 freenas kernel: ng_ether_ifnet_arrival_event: can't re-name node epair2b
Jun 12 22:58:11 freenas kernel: ng_ether_ifnet_arrival_event: can't re-name node epair2b
Jun 12 22:58:25 freenas epair3a: Ethernet address: 02:ff:60:00:07:0a
Jun 12 22:58:25 freenas epair3b: Ethernet address: 02:ff:b0:00:08:0b
Jun 12 22:58:25 freenas kernel: epair3a: link state changed to UP
Jun 12 22:58:25 freenas kernel: epair3a: link state changed to UP
Jun 12 22:58:25 freenas kernel: epair3b: link state changed to UP
Jun 12 22:58:25 freenas kernel: epair3b: link state changed to UP
Jun 12 22:58:25 freenas kernel: epair3a: promiscuous mode enabled
Jun 12 22:58:25 freenas kernel: ng_ether_ifnet_arrival_event: can't re-name node epair3b
Jun 12 22:58:25 freenas kernel: ng_ether_ifnet_arrival_event: can't re-name node epair3b
 
Last edited by a moderator:
SweetAndLow

SweetAndLow

Sweet'NASty
Joined
Nov 6, 2013
Messages
6,421
In the jail what happens if you do service plexmediaserver onestart? Did you recently change any permissions of the root dataset?

Sent from my Nexus 5X using Tapatalk
 
F

frozn00

Explorer
Joined
Dec 18, 2014
Messages
57
SweetAndLow said:
In the jail what happens if you do service plexmediaserver onestart? Did you recently change any permissions of the root dataset?

Sent from my Nexus 5X using Tapatalk
Click to expand...

Thank you for the reply. Running service plexmediaserver onestart yields:

Code:
root@sabnzbd_1:/ # service plexmediaserver onestart
Starting plexmediaserver.
su: pam_start: system error
/usr/local/etc/rc.d/plexmediaserver: WARNING: failed to start plexmediaserver
root@sabnzbd_1:/ #


As far as permissions go, I did change permissions of multiple directories and sub directories maybe a month or so ago due to permission issues I was having with different directories and wanted to change them all at once. Within those sub directories did contain this jail. But this being a month ago and haven't had any problems until now you think this might be the problem? Plugins have been fine and all of a sudden have stopped.
 
Last edited by a moderator:
SweetAndLow

SweetAndLow

Sweet'NASty
Joined
Nov 6, 2013
Messages
6,421
frozn00 said:
Thank you for the reply. Running service plexmediaserver onestart yields:

Code:
root@sabnzbd_1:/ # service plexmediaserver onestart
Starting plexmediaserver.
su: pam_start: system error
/usr/local/etc/rc.d/plexmediaserver: WARNING: failed to start plexmediaserver
root@sabnzbd_1:/ #


As far as permissions go, I did change permissions of multiple directories and sub directories maybe a month or so ago due to permission issues I was having with different directories and wanted to change them all at once. Within those sub directories did contain this jail. But this being a month ago and haven't had any problems until now you think this might be the problem? Plugins have been fine and all of a sudden have stopped.
Click to expand...
100% positive that you changed the permissions of your jails recursively and that broke all of them. You can't change the permissions of anything under your jail dataset. You should also not be sharing the root of your pool. Create datasets to share.

You will have to rebuild all your jails. People do this all the tine if you search for that Pam error.

Sent from my Nexus 5X using Tapatalk
 
F

frozn00

Explorer
Joined
Dec 18, 2014
Messages
57
SweetAndLow said:
100% positive that you changed the permissions of your jails recursively and that broke all of them. You can't change the permissions of anything under your jail dataset. You should also not be sharing the root of your pool. Create datasets to share.

You will have to rebuild all your jails. People do this all the tine if you search for that Pam error.

Sent from my Nexus 5X using Tapatalk
Click to expand...

Thank you for letting me know. I had not seen the Pam error until I ran that command to start the plugin manually. After I ran the command I thought I might have made a mistake but since it has been working for a month I thought I might have been fine. I will rebuild the jails and the plugins. Without sabnzbd, plex, sickrage, couchpotato running, will it be impossible for me to get backups of those configs before I destroy the jail completely?
 
SweetAndLow

SweetAndLow

Sweet'NASty
Joined
Nov 6, 2013
Messages
6,421
frozn00 said:
Thank you for letting me know. I had not seen the Pam error until I ran that command to start the plugin manually. After I ran the command I thought I might have made a mistake but since it has been working for a month I thought I might have been fine. I will rebuild the jails and the plugins. Without sabnzbd, plex, sickrage, couchpotato running, will it be impossible for me to get backups of those configs before I destroy the jail completely?
Click to expand...
All the configs are there in your pool just look for them under the jail dataset.

Sent from my Nexus 5X using Tapatalk
 
F

frozn00

Explorer
Joined
Dec 18, 2014
Messages
57
The ini files seem to be in their respective places:
Code:
/jails/sabnzbd_1/var/db/sabnzbd/sabnzbd.ini
/jails/sabnzbd_1/var/db/couchpotato/settings.conf
/jails/sabnzbd_1/var/db/plexdata/Plex Media Server/Preferences.xml
/jails/sabnzbd_1/var/db/sickrage/config.ini

If I want to preserve the pbis as much as possible, for example, would I need some of the database files that go along with it such as the sickbeard.db that is in the same folder as the config.ini for sickrage? What would I need to copy? Everything in the sabnzbd_1 jail, delete the jail and then copy the data back or will that not work? I also want to make sure when I delete the entire jail I don't delete the data that I have accumulated over the years.

Jails are here:

/mnt/RAID/jails

Source for jail is here:
/mnt/RAID/media
Destination:
/mnt/media

Thanks for your help.
 
Last edited by a moderator:
SweetAndLow

SweetAndLow

Sweet'NASty
Joined
Nov 6, 2013
Messages
6,421
As long as your data lives in a dataset and is mounted into the jail it will be safe when you delete the jail. Probably best to just remove the mount to be sure.

To backup the configs of each jail your going to have to look at each application and maybe add on their forums. The pbi doesn't do anything special except modify the path a little bit.

For example with Plex you want the entire plexdata directory. All you do is copy it into the correct path on the new jail and everything is back to the way it was.

Best to not delete the jail until you have the new one fully working the way you want.

Sent from my Nexus 5X using Tapatalk
 
Status
Not open for further replies.

Similar threads

D
  • Locked
FN v11 - All sort of errors after joining the AD
Replies
6
Views
2K
Decibel1000
D
ZodiacUHD
  • Locked
Noip setup issue
Replies
12
Views
3K
ZodiacUHD
ZodiacUHD
J
  • Locked
USB disk spins up again during shutdown in FreeNAS 9.3
Replies
2
Views
1K
Jan-Philip Gehrcke
J
nojohnny101
  • Locked
strange dnssd_clientstub error messages cause shutdown
Replies
3
Views
1K
nojohnny101
nojohnny101
R
  • Locked
Jails and stability?
2
Replies
29
Views
4K
snicke
snicke
Top