Edit: Update i ended up finding another tool to use and that worked just fine
I purchased four SAS drives after receiving them i discovered they where 520 sector size and attempted to format the first drive to 512.
The command I used that got interrupted was After which da8 shows 1KiB of space and fails smart scans and diskinfo checks "medium format corrupted"
Is there any way to recover from this or did i brick the drive? I have 3 more drives of the exact same size and model if that is relevant at all.
Any help would be greatly appreciated
Code:
# camcontrol cmd da11 -v -c "15 10 0 0 v:i1 0" 12 -o 12 "0 0 0 8 0 0:i3 0 v:i3" 512 # camcontrol format da11 -q -y # camcontrl format da11 -r to check the progress on web shell
I purchased four SAS drives after receiving them i discovered they where 520 sector size and attempted to format the first drive to 512.
The command I used that got interrupted was
Code:
sg_format --verbose --format --size=512 --six /dev/da8
Is there any way to recover from this or did i brick the drive? I have 3 more drives of the exact same size and model if that is relevant at all.
Any help would be greatly appreciated
Last edited: