10gb network card loses ip on reboot

[huzer1]

Hello,
I have a 10gb network card inside my freenas box and when rebooting it doesn't keep it's ip address. Any help is appreciated. This is a static setup as there's nothing capable of serving DHCP.

Freenas-11.3-U5
04:00.0 Ethernet controller: Emulex Corporation OneConnect OCe10100/OCe10102 Series 10 GbE (rev 02)
04:00.1 Ethernet controller: Emulex Corporation OneConnect OCe10100/OCe10102 Series 10 GbE (rev 02)

 

[Ericloewe]

You should probably share some details of your configuration, like Screenshots of how you configured it.

 

[huzer1]

Here's a couple screenshots of the network settings, hopefully this is what you were referring to.

I always turn DHCP off, but if I got back in to edit the interface, ipaddress is gone and dhcp is checked again. I also don't know where the 0.0.0.0 is coming from, I only put the 10.'s in there.

 

[jgreco]

There's a 10 Gig Networking Primer that talks about the cards that are known to work well with FreeNAS. Pretty sure the Emulex isn't one of them.

 

[huzer1]

It's not in the list but it was free to me. It works just fine, I get about 9gb going direct. Only issue is the system not keeping the ip.