Got this email (twice at exactly the same time) last night:
This message was generated by the smartd daemon running on:
host name: freenas
DNS domain: local
The following warning/error was logged by the smartd daemon:
Device: /dev/ada1, Self-Test Log error count increased from 0 to 1
Device info:
WDC WD10EFRX-68PJCN0, S/N:WD-WCC4J3542112, WWN:5-0014ee-25f5645f2, FW:01.01A01, 1.00 TB
For details see host's SYSLOG.
You can also use the smartctl utility for further investigation.
No additional messages about this problem will be sent.
Since then, I've run a short test, and a long test is currently running on ada1. Here is the bottom bit of the output of smartctl -a /dev/ada1 ( I don't know how to scroll up within the shell window...)
Where do I go from here?
Cheers
This message was generated by the smartd daemon running on:
host name: freenas
DNS domain: local
The following warning/error was logged by the smartd daemon:
Device: /dev/ada1, Self-Test Log error count increased from 0 to 1
Device info:
WDC WD10EFRX-68PJCN0, S/N:WD-WCC4J3542112, WWN:5-0014ee-25f5645f2, FW:01.01A01, 1.00 TB
For details see host's SYSLOG.
You can also use the smartctl utility for further investigation.
No additional messages about this problem will be sent.
Since then, I've run a short test, and a long test is currently running on ada1. Here is the bottom bit of the output of smartctl -a /dev/ada1 ( I don't know how to scroll up within the shell window...)
Code:
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 24 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 2 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 75 194 Temperature_Celsius 0x0022 113 102 000 Old_age Always - 30 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 1 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 7251 - # 2 Extended offline Completed: read failure 40% 7249 1219691232 # 3 Short offline Completed without error 00% 7228 - # 4 Short offline Completed without error 00% 7204 - # 5 Short offline Completed without error 00% 7180 - # 6 Short offline Completed without error 00% 7156 - # 7 Short offline Completed without error 00% 7132 - # 8 Extended offline Completed without error 00% 7082 - # 9 Short offline Completed without error 00% 7061 - #10 Short offline Completed without error 00% 7037 - #11 Short offline Completed without error 00% 7013 - #12 Short offline Completed without error 00% 6989 - #13 Short offline Completed without error 00% 6965 - #14 Extended offline Completed without error 00% 6914 - #15 Short offline Completed without error 00% 6893 - #16 Short offline Completed without error 00% 6869 - #17 Short offline Completed without error 00% 6845 - #18 Short offline Completed without error 00% 6821 - #19 Short offline Completed without error 00% 6797 - #20 Extended offline Completed without error 00% 6747 - #21 Short offline Completed without error 00% 6725 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Where do I go from here?
Cheers