physical network interface with vlan does not start

[mtauber]

Hi there,

i have a server with 2 nics, both intel pro/1000 - Freenas 8.0.1 Build 7661
on the first i configured my management subnet igb0 with an ip-address.

on the second interface i configured 10 vlans and not directly an ip-address.

When rebooting the system the second interface does not come up.
On the console the vlans show up with interfaces, but you need manually to do a ifconfig igb1 up to get them working.

is there anywhere an option to get the interface started in the webgui or maybe a configfile to set it up?

Thanks in advance