Hi there,
Recently my motherboard ASRock Rack E3C224D4I-14S died. So i've replaced it with the Intel Server Board S1200v3rpl (https://ark.intel.com/content/www/us/en/ark/products/71384/intel-server-board-s1200v3rpl.html)
Other components I use:
CPU: Intel Xeon E3-1231 V3 Boxed
PSU: Cooler Master V Series V550
Memory: Kingston ValueRAM KVR16E11K4/32
HBA: LSI Sas 9207-8i (flashed in IT mode) https://tweakers.net/pricewatch/330124/lsi-sas-9207-8i.html
Case: Fractal Design Define R5 Zwart
HDD's : 1 pool with 6x 4tb WD Red (cmr version) / 1 pool with 3x 4tb WD Green
I can't get the 6x4tb WD Red pool online again. I was resilvering this pool and during that time the ASrock Rack died and the resilver was not able to finish.
I installed Freenas on the new motherboard on a USB Stick (going to install on SSD later) current version is FreeNAS-11.3-U4.1. When importing the config file the system won't boot and it gives a panic and keeps rebooting. So I tried fresh install and then see if I could get the pools back online.
With zpool import -f it was possible to get the 3x4tb WD Green pool online.
But with zpool import -f for the 6x4tb WB Red is a no go. Freenas crashed and won't boot up again, it is getting a panic and keeps rebooting. If I try via the GUI same thing: freenas crashes and keeps rebooting to the panic.
This is what I see with zpool import:
root@freenas[~]# zpool import
pool: six4tb
id: 13928668106559313930
state: DEGRADED
status: One or more devices were being resilvered.
action: The pool can be imported despite missing or damaged devices. The
fault tolerance of the pool may be compromised if imported.
config:
six4tb DEGRADED
raidz1-0 DEGRADED
gptid/39dbdb0d-8506-11e7-bbff-d050996ff8e2 ONLINE
gptid/75e759d8-a341-11ea-9020-d050996ff8e2 ONLINE
gptid/bdb2785d-f5c9-11e9-bb0c-d050996ff8e2 ONLINE
gptid/b7e766d9-33df-11ea-abdb-d050996ff8e2 ONLINE
gptid/bc6a0659-4031-11ea-b4f8-d050996ff8e2 ONLINE
replacing-5 UNAVAIL insufficient replicas
13571676615721927902 UNAVAIL cannot open
18182716167874336493 UNAVAIL cannot open
I probably did something stupid. I wiped one disk (the one that is unavail now). I was hoping that I could start the resilvering procedure again.
How can I get this pool back online? (I do have another disk that probably contains some data also. I think the motherboard was dying not the disk but before I do anything else probably ask you guru's for some help...
I'm a bit worried that I can't get some data back. (lesson learned and got a backup server running now but there is something I really want to get from the data)
Fingers crossed someone can help me!
Thanks very much in advance.
Recently my motherboard ASRock Rack E3C224D4I-14S died. So i've replaced it with the Intel Server Board S1200v3rpl (https://ark.intel.com/content/www/us/en/ark/products/71384/intel-server-board-s1200v3rpl.html)
Other components I use:
CPU: Intel Xeon E3-1231 V3 Boxed
PSU: Cooler Master V Series V550
Memory: Kingston ValueRAM KVR16E11K4/32
HBA: LSI Sas 9207-8i (flashed in IT mode) https://tweakers.net/pricewatch/330124/lsi-sas-9207-8i.html
Case: Fractal Design Define R5 Zwart
HDD's : 1 pool with 6x 4tb WD Red (cmr version) / 1 pool with 3x 4tb WD Green
I can't get the 6x4tb WD Red pool online again. I was resilvering this pool and during that time the ASrock Rack died and the resilver was not able to finish.
I installed Freenas on the new motherboard on a USB Stick (going to install on SSD later) current version is FreeNAS-11.3-U4.1. When importing the config file the system won't boot and it gives a panic and keeps rebooting. So I tried fresh install and then see if I could get the pools back online.
With zpool import -f it was possible to get the 3x4tb WD Green pool online.
But with zpool import -f for the 6x4tb WB Red is a no go. Freenas crashed and won't boot up again, it is getting a panic and keeps rebooting. If I try via the GUI same thing: freenas crashes and keeps rebooting to the panic.
This is what I see with zpool import:
root@freenas[~]# zpool import
pool: six4tb
id: 13928668106559313930
state: DEGRADED
status: One or more devices were being resilvered.
action: The pool can be imported despite missing or damaged devices. The
fault tolerance of the pool may be compromised if imported.
config:
six4tb DEGRADED
raidz1-0 DEGRADED
gptid/39dbdb0d-8506-11e7-bbff-d050996ff8e2 ONLINE
gptid/75e759d8-a341-11ea-9020-d050996ff8e2 ONLINE
gptid/bdb2785d-f5c9-11e9-bb0c-d050996ff8e2 ONLINE
gptid/b7e766d9-33df-11ea-abdb-d050996ff8e2 ONLINE
gptid/bc6a0659-4031-11ea-b4f8-d050996ff8e2 ONLINE
replacing-5 UNAVAIL insufficient replicas
13571676615721927902 UNAVAIL cannot open
18182716167874336493 UNAVAIL cannot open
I probably did something stupid. I wiped one disk (the one that is unavail now). I was hoping that I could start the resilvering procedure again.
How can I get this pool back online? (I do have another disk that probably contains some data also. I think the motherboard was dying not the disk but before I do anything else probably ask you guru's for some help...
I'm a bit worried that I can't get some data back. (lesson learned and got a backup server running now but there is something I really want to get from the data)
Fingers crossed someone can help me!
Thanks very much in advance.
Last edited:
