SOLVED Multi LAN With jail

[Theflu]

Here is what I want to do I have 2 separate LANs 10.0.0.x and 10.0.1.x freenas is connected to both of them with the IPs of 10.0.0.20 and 10.0.1.20 I have a jail setup with the IP 10.0.1.21. My issue is that the jail can not communicate with anything. I can not ping the gateway google other devices by IP or name. My apps inside the jail need to connect to the internet and I cant find this out.

Please Help.


Thanks,
Flu

 

[ProtoSD]

Can you ping *anything* on either of your networks from the jail?

Can you ping the jail from FreeNAS?

Specifically, which version of FreeNAS are you using?
8.2 Release?
p1?
x64?

Are you using a VM?

 

[Theflu]

I am using 8.2.0 Release P1 64

I am currently rebuild Freenas and the jail so i have a clean slate to work with since i have changed so many settings.

If I remember correctly I could not ping anything from the jail but I could ping the jail from the other networks.

btw I am running pfsense for my firewall

No VM it's a physical machine.

 

[William Grzybowski]

Post ifconfig -a, is the bridge being made with the correct interfaces?

 

[Theflu]

[root@freenas] ~# ifconfig -a
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=389b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC>
ether 00:22:3f:ef:c9:db
inet 10.0.0.20 netmask 0xffffff00 broadcast 10.0.0.255
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
bge0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80099<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
ether 00:19:bb:cf:01:b3
inet 10.0.1.20 netmask 0xffffff00 broadcast 10.0.1.255
media: Ethernet autoselect (100baseTX <full-duplex,flowcontrol,rxpause,txpause>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 2e:1b:b4:b5:5b:f1
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: bge0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 2 priority 128 path cost 200000
member: epair0a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 5 priority 128 path cost 14183
epair0a: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 02:80:c4:00:05:0a
inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
[root@freenas] ~#

 

[Theflu]

[root@freenas] ~# ifconfig -a
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=389b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC>
ether 00:22:3f:ef:c9:db
inet 10.0.0.20 netmask 0xffffff00 broadcast 10.0.0.255
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
bge0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80099<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
ether 00:19:bb:cf:01:b3
inet 10.0.1.20 netmask 0xffffff00 broadcast 10.0.1.255
media: Ethernet autoselect (100baseTX <full-duplex,flowcontrol,rxpause,txpause>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 2e:1b:b4:b5:5b:f1
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: bge0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 2 priority 128 path cost 200000
member: epair0a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 5 priority 128 path cost 14183
epair0a: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 02:80:c4:00:05:0a
inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
[root@freenas] ~#

 

[Theflu]

[root@freenas] ~# jexec 1 csh
software# ifconfig -a
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
epair0b: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 02:80:c4:00:06:0b
inet 10.0.1.21 netmask 0xffffff00 broadcast 10.0.1.255
inet6 fe80::80:c4ff:fe00:60b%epair0b prefixlen 64 scopeid 0x2
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
software#

 

[Theflu]

EDIT: STOPPED WORKING
I fixed it! I had the wrong gateway set in the web GUI it was 10.0.0.1 and not 10.0.1.1. I guess you cant have both NICs connected to the internet. But that is ok I only need my jail to be connected to the internet.

Thank you both.

 

[Theflu]

re0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=3899<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC>
ether 00:22:3f:ef:c9:db
inet 10.0.0.20 netmask 0xffffff00 broadcast 10.0.0.255
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active


bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
ether 00:19:bb:cf:01:b3
inet 10.0.1.20 netmask 0xffffff00 broadcast 10.0.1.255
media: Ethernet autoselect (100baseTX <full-duplex,flowcontrol,rxpause,txpause>)
status: active


lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>


bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 62:ff:f4:11:d6:48
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: re0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 1 priority 128 path cost 20000
member: epair0a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 5 priority 128 path cost 2000


epair0a: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 02:80:16:00:05:0a
inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active

 

[Theflu]

It wont let me post the ifconfig -a it keeps saying post needs to be approved by mod.


bridge0
ether 62:ff:f4:11:d6:48
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: re0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 1 priority 128 path cost 20000
member: epair0a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 5 priority 128 path cost 2000



epair0a
ether 02:80:16:00:05:0a
inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active

 

[ben]

I approved one of those large posts, is that sufficient?

 

[Theflu]

Yes thank you.