I was running a raidz3 pool with 8 drives on my old server. I suddenly had trouble with 3 of the 8 drives dropping and determine the motherboard had an issue. The issue was coming from a chip that handled some of the additional sata ports and I shut down immediately to migrate. I just replaced the server with a new one and imported my degraded pool. Currently freenas (11.2) seems to be scanning the drives and I was wondering if I have to wait this out before reslivering the down drives. Currently the storage>disks and storage>pools>status shows all 8 drives but they all seem to be online. On the main dashboard the pool shows as healthy with all 8 drives though disk details are not available. When I choose reports and look at all 8 disks on the activity graphs only five are shown. Pretty sure I am at 5/8 drives and freenas is scanning them. Storage/pools/pool status shows resilver at the top with status scanning. Am I stuck waiting the scan out? Edit: Drives are 4tb if anyone has insight in how long the scan takes.