curtishall
Dabbler
- Joined
- Feb 7, 2020
- Messages
- 13
Testing with 11.3 on a Supermicro X10SBA (J1900) with 8GB of ram.
I have 4 x 250GB Seagate drives installed, 3 are the same model. I can get two of the drives to allow me to create a pool if I use the 'suggest layout' option but if I manually try to add the drives (again, 3 with the same model number and size) I get the error below.
All three drives are:
Rotation Rate: 7200
Model: ST3250310NS
I have 4 x 250GB Seagate drives installed, 3 are the same model. I can get two of the drives to allow me to create a pool if I use the 'suggest layout' option but if I manually try to add the drives (again, 3 with the same model number and size) I get the error below.
All three drives are:
Rotation Rate: 7200
Model: ST3250310NS