IBM M1115 Flash To IT Mode

[JamisonTheThird]

I recently purchased one of these from ebay and tested it before attempting to flash and it works with its stock firmware.
So I then did some research to see if I could follow a tutorial to flash a IBM M0115 and yes. Others have had success following the M0115 to flash the M1115.
So I followed this tutorial https://www.servethehome.com/ibm-serveraid-m1015-part-4/
I was able to do this part successfully:

megarec -writesbr 0 sbrempty.bin
megarec -cleanflash 0


but after that sas2flash.efi was not able to detect the card nor now megarec cannot detect it either.
I have tried several different motherboards from different companies (Supermicro, Asrock, Asus, Gigabyte) with no luck.
Could someone help me solve this issue?

Thanks

 

[Chris Moore]

You might want to read through our guide and see if there are any tips in there that would help you:

Detailed newcomers' guide to crossflashing LSI 9211/9300/9311 HBA and variants
https://www.ixsystems.com/community...shing-lsi-9211-9300-9311-hba-and-variants.54/

 

[JamisonTheThird]

I still have no idea on how to solve this problem.