Hi, this is my first server build.
My hardware:
CPU: Intel Xeon E-2172
RAM: 32 GB Samsung REG 2666
MB: Supermicro X11SCL-F
HBA: LSI MegaRAID 9211-8i SAS
HDD: 6 x WD Red Nas 4TB
SSD: 1 x Intel 80GB
The LSI card was given to me and should already be in IT mode.
I checked that the MB BIOS was the most recent, which it is.
The LSI card sits in the PCI-E x8 (in x16) slot
I dont know what BIOS settings to change, I think I've tried the most common things, like changing from Legacy to EFI and stuff like that.
If I go to the boot menu, there is nothing (I removed everything from the boot menu, except HDD and USB key)
If I just let it do the checks and wait, then it eventually goes to a screen, where it states that I can go to setup or reboot
Any suggestions?
My hardware:
CPU: Intel Xeon E-2172
RAM: 32 GB Samsung REG 2666
MB: Supermicro X11SCL-F
HBA: LSI MegaRAID 9211-8i SAS
HDD: 6 x WD Red Nas 4TB
SSD: 1 x Intel 80GB
The LSI card was given to me and should already be in IT mode.
I checked that the MB BIOS was the most recent, which it is.
The LSI card sits in the PCI-E x8 (in x16) slot
I dont know what BIOS settings to change, I think I've tried the most common things, like changing from Legacy to EFI and stuff like that.
If I go to the boot menu, there is nothing (I removed everything from the boot menu, except HDD and USB key)
If I just let it do the checks and wait, then it eventually goes to a screen, where it states that I can go to setup or reboot
Any suggestions?