Flashing IT Mode 9207

[Mike Guilmette]

Hey all! I picked up a LSI 9207 4i4e HBA and I can't seem to figure out how to flash it to IT mode. Can it be done on my NAS or do I have to do it on a separate machine? Is there a step by step walkthrough somewhere?

I tried searching but didn't come up with very much. Thanks in advanced!

 

[Chris Moore]

Detailed newcomers' guide to crossflashing LSI 9211 HBA and variants
https://forums.freenas.org/index.ph...o-crossflashing-lsi-9211-hba-and-variants.54/

 

[Ericloewe]

You don't. The LSI SAS 9207 is already in IT mode. Well, it's possibly in IR, but you don't need a crossflash. Just flash the latest IT firmware.

 

[Mike Guilmette]

Detailed newcomers' guide to crossflashing LSI 9211 HBA and variants
https://forums.freenas.org/index.ph...o-crossflashing-lsi-9211-hba-and-variants.54/

That link brings me to factory default instructions.

Sent from my LGLS992 using Tapatalk

 

[Mike Guilmette]

You don't. The LSI SAS 9207 is already in IT mode. Well, it's possibly in IR, but you don't need a crossflash. Just flash the latest IT firmware.

Ok so how would I go about doing that?

Sent from my LGLS992 using Tapatalk

 

[Ericloewe]

The sas2flash manual is your friend. Use the UEFI flasher.

https://docs.broadcom.com/docs/12353378