Fehlermeldung Festplatte

ottto

Explorer
Joined
Sep 2, 2013
Messages
83
Hallo zusammen,
kann mir jemand einen Tip geben, auf welches Problem folgende Meldungen in der "security-run-output-mail" hinweisen?

Code:
...
> ahcich2: Timeout on slot 28 port 0
> ahcich2: is 00000000 cs 00000000 ss 30000000 rs 30000000 tfd 40 serr 00000000 cmd 0000fe17
> (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 55 39 c4 13 40 0f 00 00 00 00 00
> (ada2:ahcich2:0:0:0): CAM status: Command timeout
> (ada2:ahcich2:0:0:0): Retrying command
> ahcich1: Timeout on slot 29 port 0
> ahcich1: is 00000000 cs 00000000 ss 60000000 rs 60000000 tfd 40 serr 00000000 cmd 0000e317
> (ada1:ahcich1:0:0:0): READ_FPDMA_QUEUED. ACB: 60 ab 4e 28 29 40 0f 00 00 00 00 00
> (ada1:ahcich1:0:0:0): CAM status: Command timeout
> (ada1:ahcich1:0:0:0): Retrying command
> ahcich2: Timeout on slot 17 port 0
> ahcich2: is 00000000 cs 00000000 ss 00060000 rs 00060000 tfd 40 serr 00000000 cmd 0000ef17
> (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 ab 65 e8 88 40 0f 00 00 00 00 00
> (ada2:ahcich2:0:0:0): CAM status: Command timeout
> (ada2:ahcich2:0:0:0): Retrying command
> ahcich0: Timeout on slot 7 port 0
...


Was stimmt mit den Festplatten adax nicht?

Danke.
Gruß.
ottto
 

gottestod

Dabbler
Joined
Apr 28, 2015
Messages
29
Hi ottto!

Hast du evtl. mal hier nachgeschaut:

https://www.ixsystems.com/community...olve-cam-status-command-timeout-issues.59549/
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=224536

Für SMR-Platten ist wohl das timeout zu kurz. Hast du (zwei?) SMR-Platten?

Sonst hilft evltl. suche nach "CAM status: Command timeout".
Es gibt wohl mehrere User, die ähnliche Probleme haben. Evtl. auch solche mit gleicher Hardware wie du.
Falls das nicht hilft poste doch mal die Hardware, die du verwendest,
mehr Informationen über das Problem könnten hilfreich sein.

z.B. https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=229745

Solution for WD Hard Disk Drives

I use program WDIdle3 under DOS and turn off parking heads.

https://support.wdc.com/downloads.aspx?p=113

Enter BIOS and change Mode from AHCI on controller on IDE or Compatible

And one more and IMPORTAND!!!

For the duration of the program WDIdle3.
Connected to controller only disks for change idle time.
Because utility WDIdle3 changing all HDD which conneted on controller.

Using
wdidle3 /r - current configuration ilde time on disk

wdidle3 /d - turn off idle time (I use this option)

wdidle3 /s50 - set time 50 secons (you can use 20, 30, 40 or above, read manual please)

wdidle3 /? - help for program

- - -

Turn off idle timer.
Work fine.
Speed when use rsync
320 - 340 Megabytes per second.
No error in system log.


P.S.
HGST and WD the same brend and one technology and i thinks work this solution too.
 
Top