Disk Price/Performance Analysis Buying Information

Disk Price/Performance Analysis Buying Information 01-May-2019

Z300M

Guru
Joined
Sep 9, 2011
Messages
882
Are you sure about those Seagate BarraCuda drives being 5400rpm? The 4TB one I bought recently is 5980rpm.
 

farmerpling2

Patron
Joined
Mar 20, 2017
Messages
224
Are you sure about those Seagate BarraCuda drives being 5400rpm? The 4TB one I bought recently is 5980rpm.

I just took a look at the Seagate website and they do not say. I checked a couple other places and I cannot find the reference to RPM. :eek: I get this type of spec from manufacturers web site, normally. They do mention Pro is 7200 RPM.

There are two different manuals available. One from 2016 and the other from 2017.

The 2017 does not have the 1TB drive, but has the 2TB, 3TB, and 4TB. There is no mention of spindle speed at all in this manual.

The 2016 has the 3TB, 2TB, 1TB and 500GB and lists them at 7200 RPM.

I went with the 2017 manual thinking it was more current. Maybe I was wrong? Not sure off hand.

I will dig around this more. I noticed that seek and latency speeds went up higher for the 2017 manual.

So the question is, which manual is correct.

I will see what I can dig up.

(Fix link for 2017 manual)
 
Last edited:

Z300M

Guru
Joined
Sep 9, 2011
Messages
882
I just took a look at the Seagate website and they do not say. I checked a couple other places and I cannot find the reference to RPM. :eek: I get this type of spec from manufacturers web site, normally. They do mention Pro is 7200 RPM.

There are two different manuals available. One from 2016 and the other from 2017.

Both those links are to the 2017 manual

The 2017 does not have the 1TB drive, but has the 2TB, 3TB, and 4TB. There is no mention of spindle speed at all in this manual.

The 2016 has the 3TB, 2TB, 1TB and 500GB and lists them at 7200 RPM.

I went with the 2017 manual thinking it was more current. Maybe I was wrong? Not sure off hand.

I will dig around this more. I noticed that seek and latency speeds went up higher for the 2017 manual.

So the question is, which manual is correct.

I will see what I can dig up.
Page 6 (near the top of the page) in both the 2016 and the 2017 manual state the speed as 7200rpm. The "nominal" rotational speed of my ST2000DM006 bought a couple of months ago) is shown in the S.M.A.R.T. information as 7200rpm.
 

farmerpling2

Patron
Joined
Mar 20, 2017
Messages
224
Both those links are to the 2017 manual


Page 6 (near the top of the page) in both the 2016 and the 2017 manual state the speed as 7200rpm. The "nominal" rotational speed of my ST2000DM006 bought a couple of months ago) is shown in the S.M.A.R.T. information as 7200rpm.

Thank your for catching 2017 hyperlink pointing to wrong manual. Fixed.

I just brought up both manuals.

2016 - http://www.seagate.com/www-content/...a-fam/barracuda-new/en-us/docs/100804187d.pdf

2017 - http://www.seagate.com/www-content/...a-fam/barracuda-new/en-us/docs/100805918e.pdf

I did a textual search for "7200" in both. The 2016 manual shows three references to 7200 on page 6. The 2017 came back not found. Sure would be nice to know why they removed 7200 RPM from the manual!

Maybe I missed something. Wouldn't be the first time! :rolleyes:

I am wide open to getting correct information. Just need to know what it is.

I do appreciate your effort in helping correct this! ;)
 
Last edited:

Z300M

Guru
Joined
Sep 9, 2011
Messages
882
Thank your for catching 2017 hyperlink pointing to wrong manual. Fixed.

I just brought up both manuals.

2016 - http://www.seagate.com/www-content/...a-fam/barracuda-new/en-us/docs/100804187d.pdf

2017 - http://www.seagate.com/www-content/...a-fam/barracuda-new/en-us/docs/100805918e.pdf

I did a textual search for "7200" in both. The 2016 manual shows three references to 7200 on page 6. The 2017 came back not found. Sure would be nice to know why they removed 7200 RPM from the manual!

Maybe I missed something. Wouldn't be the first time! :rolleyes:

I am wide open to getting correct information. Just need to know what it is.

I do appreaicte your effort in helping correct this! ;)
NOW I don't find any mention of the speed in the 2017 manual either. Maybe I had the wrong document.

NOTE that the 2TB drive I bought recently is an ST2000DM006, whereas that June 2017 manual give the specs. for the ST2000DM005. And my 4TB drive is an ST4000DM005, whereas the manual gives the specs. for the ST4000DM004.
 

farmerpling2

Patron
Joined
Mar 20, 2017
Messages
224
NOW I don't find any mention of the speed in the 2017 manual either. Maybe I had the wrong document.

LOL! Welcome to my world. It makes no sense to remove 7200 RPM in docs, unless they planned on something. o_O I cannot find where I got the 5400 RPM spec now any more either. I will leave it as is for a while. Your information makes me lean towards putting 7200 into the spreadsheet, but I like to be able to say the latest spec says... I cannot do that right now! :eek:
 

farmerpling2

Patron
Joined
Mar 20, 2017
Messages
224
farmerpling2 updated Disk Price/Performance Analysis Buying Information with a new update entry:

Starting to add Graphs and pivot table information

Here are the latest changes:

  • Added more disk drives
  • Updated prices on various drives
  • Updated some specs that were wrong and/or changed
  • Added a worksheet that has some pivot tables along with a graphic. I will be adding more in this area as time goes on.
    The goal is to make buying decisions easier.
  • Work on adding some more tables/graphs for other specifications that make it easier to see and understand the numbers, which will hopefully make better buying decisions for...

Read the rest of this update entry...
 

MrToddsFriends

Documentation Browser
Joined
Jan 12, 2015
Messages
1,338
The following WD models are helium filled:
WD Red 8TB, WD Red Pro 8TB
WD Red 10TB, WD Red Pro 10TB
Unfortunately not mentioned in the WD Spec Sheets but in their press releases:
8 TB models, 10 TB models
 

farmerpling2

Patron
Joined
Mar 20, 2017
Messages
224
The following WD models are helium filled:
WD Red 8TB, WD Red Pro 8TB
WD Red 10TB, WD Red Pro 10TB
Unfortunately not mentioned in the WD Spec Sheets but in their press releases:
8 TB models, 10 TB models

Thank you for the information and pointer to documentation. I have updated the file and it will be available in the next update! I could not keep the information up to date without the help of friends like yourself!
 

Chris Moore

Hall of Famer
Joined
May 2, 2015
Messages
10,080
Where do you find that Toshiba P300, 6TB drive, for only $139.99? I looked with Google and couldn't find it.
 

Chris Moore

Hall of Famer
Joined
May 2, 2015
Messages
10,080
Newegg had a special. It does not look like it is still at that price.
Not that I couldn't find the particular sale price, I couldn't even find that model of drive for sale.
 

farmerpling2

Patron
Joined
Mar 20, 2017
Messages
224
Not that I couldn't find the particular sale price, I couldn't even find that model of drive for sale.

You are correct. I am not sure how that happened. I am guessing Cut/Paste. I checked the spec sheets and the P series goes to 3TB and X goes from 4-8TB. Thanks for catching that!
 

farmerpling2

Patron
Joined
Mar 20, 2017
Messages
224
farmerpling2 updated Disk Price/Performance Analysis Buying Information with a new update entry:

13-Oct-2017

As always this is a work in progress. You may see fields, data structures that are not complete. Please ignore and know that I am working on it.

The latest...
  • Added some more 2.5" drives
  • Added some more pivot tables and graphs. You can play with some of the filters. A good one is warranty generally, select 5 years (PRO/Enterprise), 3 years (SOHO), 2 years (Home)
    Formfactor: 2.5", 3.5"
    Type: NAS
  • Updated pricing on a bunch of drives
  • Updated some specs on various drives...

Read the rest of this update entry...
 

farmerpling2

Patron
Joined
Mar 20, 2017
Messages
224

Jatrabari

Contributor
Joined
Sep 23, 2017
Messages
100
Would it be possible to do a pdf version or something of this resource because I don't have Excel and LibreOffice doesn't understand all of the columns and gives errors to the formulas...
 

Ericloewe

Server Wrangler
Moderator
Joined
Feb 15, 2014
Messages
20,194
Excel online should also work and it's free (mostly).
 
Top