Can't find Multipath settings area with multiple redundant controllers installed and available on system (NetApp DS4243 with multiple controllers)

KenwoodFox

Explorer
Joined
Nov 6, 2018
Messages
74
So I just got my NetApp DS4243 all wired up with both controllers and an HBA card, now, first off, my first two disks show up as 0 bytes but, I think this could be a SATA-SAS adapter error, so ill debug that later, I'm more concerned about how my drives show up twice! Multipath? I am using both controllers, but I don't see the storage>multipath option like the manual says I should. I'm looking here. Thanks so much for reading guys.
1579835734823.png

1579835776713.png

Again thanks!
 

KenwoodFox

Explorer
Joined
Nov 6, 2018
Messages
74
Heres my
Code:
# camcontrol devlist
<SEAGATE ST31000424SS 0006>        at scbus0 target 0 lun 0 (pass0)
<SEAGATE ST31000424SS 0006>        at scbus0 target 1 lun 0 (pass1)
<SEAGATE ST31000425SS MS01>        at scbus0 target 2 lun 0 (pass2)
<SEAGATE ST31000425SS MS01>        at scbus0 target 3 lun 0 (pass3)
<TOSHIBA MK1001TRKB 0105>          at scbus0 target 4 lun 0 (pass4)
<SEAGATE ST31000424SS 0006>        at scbus0 target 5 lun 0 (pass5)
<DP BACKPLANE 1.05>                at scbus0 target 8 lun 0 (pass6,ses0)
<HITACHI HUA722020ALA33SM NA06>    at scbus1 target 11 lun 0 (da0,pass7)
<HITACHI HUA722020ALA33SM NA06>    at scbus1 target 12 lun 0 (pass8,da1)
<WDC WD5000AAKX-75USM 4321>        at scbus1 target 13 lun 0 (pass9,da2)
<ST500DM0 02-1BD142     SM 4321>   at scbus1 target 14 lun 0 (pass10,da3)
<WDC WD5000AAKX-75USM 4321>        at scbus1 target 15 lun 0 (pass11,da4)
<ST500DM0 02-1BD142     SM 4321>   at scbus1 target 16 lun 0 (pass12,da5)
<WDC WD5000AAKX-75USM 4321>        at scbus1 target 17 lun 0 (pass13,da6)
<ST500DM0 02-1BD142     SM 4321>   at scbus1 target 18 lun 0 (pass14,da7)
<WDC WD5000AAKX-75USM 4321>        at scbus1 target 19 lun 0 (pass15,da8)
<ST500DM0 02-1BD142     SM 4321>   at scbus1 target 20 lun 0 (pass16,da9)
<WDC WD5000AAKX-75USM 4321>        at scbus1 target 21 lun 0 (pass17,da10)
<ST500DM0 02-1BD142     SM 4321>   at scbus1 target 22 lun 0 (pass18,da11)
<HGST HTS545050A7E68SM 4321>       at scbus1 target 23 lun 0 (pass19,da12)
<WDC WD5000LPVX-60VSM 4321>        at scbus1 target 24 lun 0 (pass20,da13)
<WDC WD5000AAKX-08ESM 4321>        at scbus1 target 25 lun 0 (pass21,da14)
<ST500DM0 02-1BD142     SM 4321>   at scbus1 target 26 lun 0 (pass22,da15)
<ST500DM0 02-1BD142     SM 4321>   at scbus1 target 30 lun 0 (pass23,da16)
<NETAPP DS424IOM3 0212>            at scbus1 target 35 lun 0 (pass24,ses1)
<HITACHI HUA722020ALA33SM NA06>    at scbus1 target 36 lun 0 (da17,pass25)
<HITACHI HUA722020ALA33SM NA06>    at scbus1 target 37 lun 0 (pass26,da18)
<WDC WD5000AAKX-75USM 4321>        at scbus1 target 38 lun 0 (pass27,da19)
<ST500DM0 02-1BD142     SM 4321>   at scbus1 target 39 lun 0 (pass28,da20)
<WDC WD5000AAKX-75USM 4321>        at scbus1 target 40 lun 0 (pass29,da21)
<ST500DM0 02-1BD142     SM 4321>   at scbus1 target 41 lun 0 (pass30,da22)
<WDC WD5000AAKX-75USM 4321>        at scbus1 target 42 lun 0 (pass31,da23)
<ST500DM0 02-1BD142     SM 4321>   at scbus1 target 43 lun 0 (pass32,da24)
<WDC WD5000AAKX-75USM 4321>        at scbus1 target 44 lun 0 (pass33,da25)
<ST500DM0 02-1BD142     SM 4321>   at scbus1 target 45 lun 0 (pass34,da26)
<WDC WD5000AAKX-75USM 4321>        at scbus1 target 46 lun 0 (pass35,da27)
<ST500DM0 02-1BD142     SM 4321>   at scbus1 target 47 lun 0 (pass36,da28)
<HGST HTS545050A7E68SM 4321>       at scbus1 target 48 lun 0 (pass37,da29)
<WDC WD5000LPVX-60VSM 4321>        at scbus1 target 49 lun 0 (pass38,da30)
<WDC WD5000AAKX-08ESM 4321>        at scbus1 target 50 lun 0 (pass39,da31)
<ST500DM0 02-1BD142     SM 4321>   at scbus1 target 51 lun 0 (pass40,da32)
<ST500DM0 02-1BD142     SM 4321>   at scbus1 target 55 lun 0 (pass41,da33)
<NETAPP DS424IOM3 0212>            at scbus1 target 60 lun 0 (pass42,ses2)
<SONY DVD-ROM DDU810A KD38>        at scbus2 target 0 lun 0 (pass43,cd0)
<INTEL SSDSA2M040G2GC 2CV102M3>    at scbus3 target 0 lun 0 (pass44,ada0)
<INTEL SSDSA2M040G2GC 2CV102M3>    at scbus4 target 0 lun 0 (pass45,ada1)

I see every device twice! Ureka! But now what?
 

blueether

Patron
Joined
Aug 6, 2018
Messages
259
I have the same issue with a ktn-sl3, I was wondering if in my case it was because I had allready set up pools or that I have 4 sata disks in the enclosure. Freenas sees all the sas drives twice so I don't know why...

anywat I just run mine on a single controller
 

KenwoodFox

Explorer
Joined
Nov 6, 2018
Messages
74
I have the same issue with a ktn-sl3, I was wondering if in my case it was because I had allready set up pools or that I have 4 sata disks in the enclosure. Freenas sees all the sas drives twice so I don't know why...

anywat I just run mine on a single controller
Shoot, Multipath is a real feature right? the manual says it can be configured?! Ugh! Ill pull a controller :c
 

blueether

Patron
Joined
Aug 6, 2018
Messages
259
It can be done manually but I cant be bothered for a home lab, far too much effort
 
Top