Alerts: Device: /dev/da2 [SAT], 16 Currently unreadable (pending) sectors

cozd74

Dabbler
Joined
May 31, 2018
Messages
45
ciao
da qualche giorno Freenas mi segnala quanto in oggetto nonostante che ho controllato il disco da windows con chkdsk /f
a cosa è riconducibile questo avviso? è sintomatico di un danno imminente?
grazie
Dario

questi i mie diski: da1 e da2 sono due dischi esterni da 3 TB
da1 è il backup esterno del mio volume, da2 lo uso per memorizzare video di grandi dimensioni (4K o UHD) che poi vedo con Plex

1560280632886.png
 

cozd74

Dabbler
Joined
May 31, 2018
Messages
45
root@freenas:/mnt/myVolume/myScript # smartctl -q noserial -a /dev/da2
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Toshiba 3.5" DT01ACA... Desktop HDD
Device Model: TOSHIBA DT01ACA300
Firmware Version: MX6OABB0
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Jun 11 21:22:05 2019 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (21504) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off supp ort.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 359) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 140 140 054 Pre-fail Offline - 67
3 Spin_Up_Time 0x0007 143 143 024 Pre-fail Always - 401 (Average 402)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 197
5 Reallocated_Sector_Ct 0x0033 078 078 005 Pre-fail Always - 572
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 33
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 2759
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 179
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 258
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 258
194 Temperature_Celsius 0x0002 122 122 000 Old_age Always - 49 (Min/Max 19/61)
196 Reallocated_Event_Count 0x0032 076 076 000 Old_age Always - 596
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 16
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
 

glauco

Guru
Joined
Jan 30, 2017
Messages
524
Ciao, dovresti fare un extended self-test sul disco da2: smartctl -t long /dev/da2.
 

cozd74

Dabbler
Joined
May 31, 2018
Messages
45
Ciao, dovresti fare un extended self-test sul disco da2: smartctl -t long /dev/da2.
comando eseguito come indicato anche in https://www.ixsystems.com/community...-1-currently-unreadable-pending-sectors.9824/

quindi in accordo all'articolo

root@freenas:~ # smartctl -A /dev/da2
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 140 140 054 Pre-fail Offline - 67
3 Spin_Up_Time 0x0007 143 143 024 Pre-fail Always - 401 (Average 402)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 198
5 Reallocated_Sector_Ct 0x0033 078 078 005 Pre-fail Always - 572
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 33
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 2769
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 180
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 259
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 259
194 Temperature_Celsius 0x0002 230 230 000 Old_age Always - 26 (Min/Max 19/61)
196 Reallocated_Event_Count 0x0032 076 076 000 Old_age Always - 596
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 16
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always -
0

quindi poi..


root@freenas:~ # sysctl kern.geom.debugflags=16
kern.geom.debugflags: 0 -> 16
root@freenas:~ # dd if=/dev/zero of=/dev/da2 bs=4096 count=1 seek=16 conv=noerror,sync
1+0 records in
1+0 records out
4096 bytes transferred in 0.001396 secs (2934652 bytes/sec)


root@freenas:~ # smartctl -A /dev/da2
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 140 140 054 Pre-fail Offline - 67
3 Spin_Up_Time 0x0007 143 143 024 Pre-fail Always - 401 (Average 402)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 198
5 Reallocated_Sector_Ct 0x0033 078 078 005 Pre-fail Always - 572
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 33
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 2769
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 180
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 259
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 259
194 Temperature_Celsius 0x0002 200 200 000 Old_age Always - 30 (Min/Max 19/61)
196 Reallocated_Event_Count 0x0032 076 076 000 Old_age Always - 596
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 16
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0

root@freenas:~ #


nulla però è cambiato! :-'(
perchè?

grazie
D
 

glauco

Guru
Joined
Jan 30, 2017
Messages
524
Manderesti l'output di smartctl -l selftest /dev/da2?
 

cozd74

Dabbler
Joined
May 31, 2018
Messages
45
Manderesti l'output di smartctl -l selftest /dev/da2?
root@freenas:~ # smartctl -l selftest /dev/da2
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 2768 -
 

glauco

Guru
Joined
Jan 30, 2017
Messages
524
Sebbene l'extended self-test non abbia rilevato errori, il numero di settori rovinati (16) e riallocati (572) superiore a zero, a leggere qui e qui, è un segno che il tuo hard disk da2 sta per tirare le cuoia.
Se è ancora in garanzia potresti fare un RMA e fartene mandare uno nuovo.
 
Top