Salve a tutti,
sono nuovo di FreeNAS e di tutte le community, penso di aver inserito questo post nella sezione giusta se così non fosse avvisatemi.
Ho da poco tempo realizzato un nas con dei buoni componenti e sono anche riusciti a condividere la piscina in locale, ma ho servito anche fuori casa...
ich möchte gern einen OpenVPN Server in einem Jail einrichten.
Um mir etwas Zeit und Nerven bei diesem Vorhaben zu sparen möchte ich gern auf eure jahrelange Erfahrungen zurück greifen.
Ich erwarte hier nicht unbedingt eine detaillierte Anleitung ein entsprechender Link mit...
I followed the Bibi40k install openVPN guide to setup a VPN server.
This works in most places, but when connecting the client in a separate residence
(which happens to use the same router [Google Wifi] and the same local network [18.104.22.168/24] as the server location),
the client could not...
If both guides are followed, openVPN is installed in a jail and
plex and transmission are installed in a separate jail.
• I am able to remotely connect to freeNAS and my file system through ssh via openVPN.
• I am able to run plex and/or transmission without issue, even with openVPN...
Hi, really new user to this VPN stuff, and NAS aswell to be honest.
I've managed to install everything, it's up and running, but now I feel just lost. (I'm using this guide)
When I come to this section in the guide, OpenVPN Server Configuration, I dont know what settings I should use and it's...
I've installed openvpn client in a jail - which is working fine (guide)
now I want to use the vpn connection with the deluge jail
Following the FreeBSD as router guideline
I've set gateway_enable="YES" in /etc/rc.conf
and set the vpn jail as gateway in deluge
but I cannot reach any...
I have a network setup as:
ISP -- Modem -- Google Wifi (Primary) --wifi-- Google Wifi (Secondary) -- Ethernet Switch -- NAS
I'm trying to setup an openVPN jail, but I haven't made progress for a while now.
I'm wondering if the use of either
• the wifi AP to wifi AP connection or
Followed this well-established guide to start.
Since I clearly do not have remote access running (heh),
I'll post jail parameters later when I get local access.
With regard to:
Should I be seeing something under the sockstat -4 -l command?
(Restarted entire system.)
(No feedback in actual thread for a month, thought I might open the questions to the full forum:)
With regard to this guide:
• How complex should Password1 and Password2 be?
8 chars? 12? 16+?
Upper and lowercase?
• What are alternative NAT addresses one might use (and why...
Specifically I changed my train from 11.1-U6.3 to 11.2-RELEASE-U1, and although my plex and transmission jails were still working in the old no longer supported warden jails, i decided to try to get them working in the new iocage jails. I was able to get all this working the way I used to have...
Hi i have just set up a openvpn client in a freenas 9.10u6 jail
The service is running and its listening on port 10011
When i put my .opvn file onto my phone it connects and shows upstream traffic but i get nothing downstream
i am unable to access the internet or devices on the network
I have been having issues with my transmission jail so I decided to start from scratch. I have gone through setting up openVPN but here's the error I'm getting:
openvpn --config /usr/local/etc/openvpn/openvpn.conf
Wed Dec 5 18:32:08 2018 WARNING: file...
I am having trouble getting openvpn working in 11.2.
It was running in 11.1, but after the upgrade - it stopped, and now I cannot reinstall it again.
This is a guide I am trying to put together (from many different sources), if I should need to do it once again - and hopefully after I have...
After having spent more than a month, Googling, reading and trying to get this to work, I am once again turning toward the community here for help...
I can simply not figure out what is wrong, and how to check if it is right.
Today, after having even more problems setting up openVPN on my...
Newly created FreeNAS 11.1-U6 standard jail. Updated and upgraded everything. Installed OPENVPN from pkg. openvpn fails to execute with error:
Shared object "libdl.so.1" not found, required by "openvpn". All install guides just assume that this will not occur. Cannot determine how to install...
I have my Freenas box setup on a VLAN with an IP 192.168.30.XX and I can access the Freenas GUI, the Plex Jail and my ZoneMinder jail from a different VLAN (The rest of my network is on 192.168.1.XX).
What I don't seem to be able to do, is access transmission gui once OpenVPN starts. If I...
Hi all Im new to freenas, Have recently tried transitioning my quick and easy warden plugins to iocage manual jails. I followed these guides to setup openvpn:
I run openvpn on my transmission jail and it uses "tun1" as the tunnel for connections. Every couple of days I notice that transmission will not connect to anyone and realize "tun1" state has been changed to down.
Is there something i can do that when "tun1" state is changed to...
So I've setup my Tranismission, ran it thru a private VPN, got it downloading from a private tracker...
I opened up port 51412 (transmission default), and access the interface thru port 9091.
Downloads work just fine.
Settings for Transmission
I had a working OpenVPN iocage jail. It stopped working. Unfortunately, I hadn't used the VPN in a while (a couple of months), so I don't know exactly when it stopped working - that is, I'm not sure what I did to make it break. I've been spending a lot of time on this. I need help! Please.
What I've Tried
So I hate opening a post about this topic as there are plenty of guides out there to how one can get the Transmission jail to tunnel through OpenVPN/PIA, however, I have tried countless of them with no success. I had used these guides before to successfully set up a jail with a...
Hello all. I wanted to see if anyone knows or has tried to list multiple vpn servers in the openvpn.conf file of their openvpn clients? I have a transmission plugin with openvpn and ipfw running in the jail and it's working great. The only thing I wish I could do is list multiple vpn servers to...
I'm wondering if it is possible to connect two FreeNAS units over the WAN using OpenVPN. To avoid spending more money on a VPN router, could I install OpenVPN to jails on each FreeNAS unit and then treat one as the server and one as the client?
Recently I use this guide to install OpenVPN insiede a jail --> https://forums.freenas.org/index.php?threads/how-to-install-openvpn-inside-a-jail-in-freenas-9-2-1-6-with-access-to-remote-hosts-via-nat.22873/
I don't see why I can't connect from my PC to my VPN. Could you help me please?
I successfully set-up a VPN tunnel from my laptop to my home network through OpenVPN and now I'm able to have access to my home network and my NAS.
Everything works just fine, except for the fact that moving files from a folder to another requires an unreasonable amount of time (so...
After struggling with an overly complicated setup, decided to try and simplify my configuration. Basically, I have a home network and two FreeNAS server with an OpenVPN server on the gateway to the internet. I also have at a remote location another FreeNAS box that I wanted as a Replication...
Ciao a tutti e grazie in anticipo a chi vorrà darmi una spiegazione di quanto accaduto.
Ieri sera ho deciso di installare openVPN in una jail del mio freenas 11. Tutto ha funzionato perfettamente e riuscivo a connettermi alla vpn sia da client windows che dal mio telefono android, riuscendo a...
I installed OpenVPN in a jail on FreeNAS 11 using the many guides/posts/etc. available by Googling.
After a lot of reading and experimentation, I got the OpenVPN server to run in the jail and was able to connect from a Windows 10 client.
My local network is using 192.168.1.x with the...
I'm a newbie to FreeNAS and I've been reading through various posts in this forum on installing OpenVPN. Some of them are discussing methods that are advance to me and they refer to other posts on "Getting Started". They're sending me back and forth for researching the basic shell commands...
I'm fairly new to FreeNAS -- very cool product. I've set up a server with a test disk and some plugins (Plex, deluge, etc) and everything is working great.
I'd like to traffic for some of the jails (but not all) through OpenVPN, connected to the PIA service. I've set up an OpenVPN jail and...
I would like to set up OpenVPN so that I can monitor & troubleshoot my home network while I'm away. Plex or Transmission occasionally stop working and then I get a call from the wife. It's really hard troubleshooting over the phone.
My question is whether it's better to set up OpenVPN on the...
I finally got a jail working with OpenVPN (client), Transmission, and a socks proxy (3proxy).
I had to solve some reliability problems with a custom service/script, but I wonder if there is a better way. Basically, the Transmission and 3proxy configurations depend on the VPN endpoint IP address...
I get the TLS Error: local/remote TLS keys are out of sync error in my transmission jail from time to time.
When this happens I cannot get any connection within the jail.
After I restart the openvpn service it works again. This happens from time to time and is very annoying, but I could not...
Summary: I plan on building a NAS and using FreeNAS v10 (whenever it is released) to control 24 usable terabytes of space (RAIDZ2, 6X6TB). Wherever possible, I want to let the NAS be a NAS and offload applications and services to a separate Ubuntu server, but I’m learning that it makes more...
I'm new here and new to FreeNAS which I installed some days ago.
I need to set up an openvpn client on my NAS box to be able to access its web interface from my home based vpn network.
I managed to start the client manually, but I can't do it automatically on boot.
I learned how...
J'utilise Freenas depuis peu de temps, il est configuré avec: Plex, Transmission (+script openvpn), SickRage et CouchPotato.
Dans ma jail transmission j'utilise un script qui lance transmission uniquement quand le VPN est connecté.
Voici le script...