Hi everyone, as a disclaimer, I am a newbie with FreeNAS and using Jails so don't hate too much.
My question is that I want to access my website which I have running inside a jail on my freenas machine. It is running build 11.0-U2 and the jail has apache24 installed. I can access it fine using...
Hello!
I've tried to find information on this issue. The reason why I might be interested in the possibility of running FreeNAS as a jail is the absence of Infiniband support (which is present in the standard FreeBSD). Thus I'm asking
(1) would it be technically possible at all to run FreeNAS...
Bonjour, sur mon serveur Freenas j'ai 2 carte réseau. Voici les interfaces: re0 et re1. J'ai actuellement 2 réseau, un normale et un réseau VPN. Re0 est câbler sur le normale et le re1 sur le réseau VPN.
Je souhaiterais que une de mes jails soit sur le contrôleur réseau re1. Mais je me suis...
Setting up a FreeNAS Dual NIC configuration: the motherboard NIC as em0 (FreeNAS is on 192.168.0.50) and an additional pcie NIC as em1 (FreeNAS is on 192.168.1.51). I am lacking Internet from jails on inner subnet 192.168.0.0/24 (with gateway 192.168.0.1) that is a neighbor network to the outer...
Hey,
I added two Jails to my FreeNAS 11 System. One is a Plex Jail, it is working great without problems, i configured a DDNS service and forwarded the port and I can reach it from outside my local LAN. But I also added a jail for VPN Server (SoftEther). This jail is working in my local LAN but...
Hello,
Im wondering if anyone could help me figure out a problem i've been having with some but mostly one jail...
My server is currenlty connected via a managed switch to the router with a static ip.
nameservers set to 8.8.8.8 and 8.8.4.4
default gateway set to ip of router.
the server...
FreeNAS
Build FreeNAS-9.10.2-U3 (e1497f269)
Platform AMD A4-5300 APU with Radeon(tm) HD Graphics
Memory 7334MB
System Time Thu Apr 27 01:18:21 EDT 2017
Uptime 1:18AM up 4 days, 15:27, 0 users
Load Average 0.12, 0.20, 0.32
Plex Jail
Reinstalled to a new jail after updating FreeNAS from 9.3 to...
Ok, so I installed a fresh copy of FreeNAS 9.10 STABLE and configured my ZFS volume this morning. Everything was looking good. Once I started installing plugins, my networking started to go crazy. I started dropping pings to the server and my wireless AP keeps dropping networks. I suspect...
I'm currently running a bunch of different jails on my network all with individual static IP's. I know one of the reasons VIMAGE is used is so the jails are able to use DHCP and obtain their own IP's since they have a full network stack. I'm not using DHCP do I need to use it?
Since VIMAGE is...
Hi there,
I cannot seem to find the right doc/help.
I have a setup of two nic's ( ex0 and in0 for the sake of this description)
ex0 is the external interfance and in0 the internal one.
My fire-wall config get's loaded via tunables (pf_enable and pf_config pointing).
This is so far OK,
my...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.