Hi there,
I experience this twice in a month.
From the alarm date-time tag The boot pool was DEGRADED while scrubbing the boot pool itself.
I already reinstall the OS in new USB stick.
But afraid of happening again.
I have zfs check down here. vvvvv
This one is the first time:
pool...
Hi to all, I would appreciate any help!
Today the pool was lost. I have 3x wd red drives on freenas.
Some days ago I saw a degraded message on the dashboard and I wrote down the serial number of that drive. I then changed My PSU and all the cables and the message went away after I restarted.
I...
I ran past my freenas box 15 minutes ago and saw a number of messages on the console. Great. I logged into the web interface and found this error:
The volume tank1 state is DEGRADED: One or more devices are faulted in response to persistent errors.
Checking the pool status shows this:
No...
Hi,
Firstly, due to personal reasons, my current NAS setup was never fully completed upon last rebuild, adding all the email stuff for alerts and scripts etc. That was my bad, but I just wasn't using it either, until recently. So I had undusted the box to try get a good working Plex setup again...
Hello,
I'm a newbie, and I've done a bit of reading around here. My system is
FreeNAS-11.1-U6
Supermicro X11SSM-F
Intel(R) Xeon(R) CPU E3-1275 v5 @ 3.60GHz
16GB ECC RAM
8x2TB HDD (4 WD RED WD20EFRX & 4 Seagate Ironwolf ST2000VN000)
My system was showing an error:
The volume vol1 state is...
Just had a data drive fail. The Hot Spare kicked in. The good drive was resilvered without errors. However, the pool is still showing as DEGRADED. What additional steps do I need to take?
I did try to put /dev/gptid/a7296f03-9690-11e9-ac10-3cfdfecf5af8 OFFLINE. It's currently OFFLINE now...
Hello together,
I have a big issue with my freenas. My both pools (for the os (name: freenas-boot) and for my data (name: pool)) were degraded with a lot of errors:
frenas-boot is a SSD, connect with usb3
data pool are 4 WD RED 4TB as raidz-1
Yesterday I had time for a new build. At first I...
My boot device has "recently" been DEGRADED. So I've bought two new USBs and now I'm trying to replace the degraded device with two new.
This is my process:
System -> Boot Environments -> Status -> Attach
- Member Disk = da2
- Save
[EFAULT] 'newfs_msdos -F 16 /dev/da2p1' failed: newfs_msdos...
Power glitch degraded both mirrored usb boot drives. Still working but want to try and resolve before it dies completely. I have a few other usb drive for testing.
Installed freenas 11.1U6 onto a new usb drive (what is running on current usb), inserted into system as sole usb drive, system...
Hi All,
I re-purposed an old CAD workstation to run FreeNAS RC1, about half an hour after initial boot I got a re light indicating the boot volume is degraded. I used a brand new 120 GB WD green SSD. How can I tell if the ssd is faulty? I've seen other threads with people having issues with ssd...
Hello everyone. I have a workstation machine running Debian stretch with 24 GB of RAM + 8TB WD Red with an exact setup in another city (at my parents home) and they mirror each other with a nightly rsync script. I'm running out of storage (83% occupied). I've decided to give FreeNAS a shot and...
Hello,
I've been seeing the following messages for at least 2 weeks now, but I've been unable to find any specific information about what's going on. I've scoured the forums as well as Google, but I can't seem to find anyone else who's hit this message.
Messages:
Jul 14 08:53:46 freenas...
My FreeNAS box had been running FreeNAS-11.1-U2 perfectly fine since it came out, and had been running continuously for about three months. Then, a couple hours ago, BAM! -- it rebooted for no reason I can figure. (I confirmed that the reboot was real via the uptime, which was in the minutes...
I am getting the error "The volume ali_pool state is DEGRADED: One or more devices are faulted in response to persistent errors. Sufficient replicas exist for the pool to continue functioning in a degraded state." the shell reads
pool: ali_pool
state: DEGRADED...
Hi all,
first of all my system config:
Xeon E3-1225v3 on Dell T20 motherboard
24GB of DD3 ECC memory
10x4TB WD RED in RAIDZ2 connected 8drives via flashed M1015 and 2 drives via onbaord SATA.
Seasonic Focus Plus Platinum 650W with APC Back UPS Pro 900VA in front of the system.
Today I am...
Build: FreeNAS-11.1-U4
Drives: Seagate IronWolf 4 TB
Number of drives in zfs pool: 2
Pool type: Mirrored
Description:
One of my two drives needs to be RMA'ed. The two drives are mirrored in a ZFS-pool.
It it possible to remove the faulty drive (putting the faulty drive into offline and...
I have loaded Freenas on two SSDs and get a degraded message in the GUI. If I load Freenas on to each drive separately the system shows healthy. Is there something I am doing wrong, should I try to mirror the drive after the first drive installation?
FreeNAS 11.1-U3
Supermicro X11SSL-CF with six Toshiba DT01ACA3 drives connected to the LSI 3008 (FW PH15.00.03.00).
I got a critical alert today:
CRITICAL: March 24, 2018, 8:52 a.m. - Device: /dev/da3 [SAT], failed to read SMART Attribute Data
CRITICAL: March 24, 2018, 8:48 a.m. - The volume...
After I have done the replace and finished resilver the old disk is still being listed and offline (I have already removed it from the machine) and continues the DEGRADED state. What should I do?
The resilver process took + or - 48h and the server was unstable during this time. It restarted...
Depois que fiz o replace e concluiu o resilver o disco antigo continua sendo listado e offline (já retirei da máquina) e continua o estado DEGRADADO. O que devo fazer?
O processo de resilver levou + ou - 48h e o servidor ficou instável durante esse tempo. Reiniciou varias vezes e quando estava...
Hello
I am getting this message sent to me from my server (mail):
Checking status of gmirror(8) devices:
Name Status Components
mirror/swap0 DEGRADED ada0p1 (ACTIVE)
When checking volume status I get this:
When doing zpool status in cli I get this:
Can someone explain to me what is...
I have been running freens on my fileserver almost a year now. I originally installed it with 9.10 and updated to 11.0 after going to Corral and reverting back. No issues so far. Today I notice that 11.1 is out and I update my 11.0-U4 install. After boot I log in and I see a critical notice that...
I'm on a budget and only have 5 3TB Hard Drives lying around, but I want to at least get 12TB of storage. This is just going to be a test pool for now with some simple and already backed up things stored on it, but going forward if this does end up turning into a more heavily relied on storage...
Hi,
I am new to freenas and have setup my system about a month back. I have received an error message on the GUI that says "The volume Data state is DEGRADED: One or more devices has experienced an error resulting in data corruption. Applications may be affected."
Status of "'zpool status -v"...
Hi,
I just updated to 11.0-U4 and after that my raidz2 is in degraded state.
The strange thing about this is all 5 disks are available.
camcontrol devlist
<ST4000DM000-1F2168 CC54> at scbus1 target 0 lun 0 (pass1,ada1)
<ST4000DM000-1F2168 CC54> at scbus2 target 0 lun 0 (pass2,ada2)...
Hey Guys,
I've had my FreeNAS setup for a few years now, but it's recently been claiming to have a degraded volume. When I check disks, one of my new disks is missing from the list. Then, when I restart the server, the disk is back. I get this problem every other week or so.
When I run a check...
Hi all,
Came home from work to find my FN Corral install wasn't working. After a little investigation I found that my ZFS pool was DEGRADED. I might add I was running boot USBs in Mirror and the system was providing the following errors:
Despite the mirror regardless of which USB was in the...
I tried changing a drive, but when i unplugged it, the sata ports changed i think? what was ada3 before became ada4 and ada4 became ada5. Now my volume is unavailable because 3 of the disks have the status removed, even if all the original disks of the volume are connected.
Hello All,
My ada5 disk keeps falling off of my pool. This is the third time. I get the following error on the GUI when it happens:
CRITICAL: Aug. 7, 2017, 10:55 p.m. - The volume tank state is DEGRADED: One or more devices has been removed by the administrator. Sufficient replicas exist for...
Hi. I've been running a FreeNAS system for the last two years. The specs are
Supermicro X9SRH-7TF
Xeon E5 1620 v2
96GB RAM
2x Intel M1015
1x Intel X540-T2
12x 5TB
8x3TB
I have a Volume configured with 10 mirrored RAIDs totaling about 29TB of storage. A few days ago, one of the matched pairs...
I've progressed through the article on b3n.org about setting up FreeNAS as a VM. Ive given it 2 dedicated cores and 16 GB of dedicated RAM.
I followed all the recommendations as best I could. I have the following setup:
supermicro x10 srh-clnf4
Intel(R) Xeon(R) CPU E5-2650 (12 core w...
After upgrading from 9.10.1-U4 to 9.10.2-U3, the freenas server restarted several times alone.
The volume VOL_RAIDZ2 (ZFS) state is ONLINE: One or more devices has experienced an error resulting in data corruption. Applications may be affected.
11c11
< freenas-boot/ROOT/9.10.1-U4 / zfs...
It's not my day, the new server parts for my freenas build didn't pass POST, and now I got a degraded pool :( Probably because I was upgrading some parts and moving the chassi around and booting several times.
Im hoping its a problem with a sata cable and not a broken disc it self. How can I...
Error:
Boot Volume Condition: DEGRADED One or more devices has been removed by the administrator. Sufficient replicas exist for the pool to continue functioning in a degraded state.
Hello,
I am trying to figure out what's happened on my FreeNAS-9.10.1 system, I haven't made any settings...
Hi all,
I've been having some terrible performance issues over SMB with my FreeNAS server and I haven't found a source to the problem (I just upgraded to 32GB RAM). I tested the ECC RAM for 24 hours, no issues overall there.
I'm thinking it's a problem with FreeNAS/USB Install and NOT my Zpool...
Hello
I am new FreeNAS user. My setup consists of:
FreeNAS-9.10.1-U4 (ec9a7d3) on 8GB USB 2.0 Flash Drive
GIGABYTE GA-H55M-UD2H
Intel i5-650
4x 4GB Crucial Battlix 1600MHz non-ECC memory
5 Hard drives: 2x 1TB (temporary) and 3x3TB in a RAID-Z2
Initially everything was fine except for 1 faulty...
Just a quick question that I believe I know that answer to but want confirmation (or denial) from the community.
Currently my raidz2 vdev is degraded (as referenced here). The replacement drive has come but I will not have physical access to the system until next week. The system is currently...
On FreeNAS when a disk fails it's pretty hard to tell which disk is the culprit, especially on large storage arrays where you have many disks.
In the FreeNAS web interface I can only see the gptid of the failed disk. If I click on the volume and then View Disks the failed disk no longer shows...
Hello everyone,
I have been getting a warning that my pool is degraded. It does say scrub have repaired 531M. Now my question is should I be worried or replace the disk "Right Now". I have a fairly good backup system in place with continuous backup to external disk and offsite backup via...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.