Hardware/OS: WD 2TB - Western Digital Black - /dev/ada0 (additional drive we installed for zpool) WD 2TB - Western Digital Black - /dev/ada2 (additional drive we installed for zpool) 1TB - Seagate Barracuda 3.5 - /dev/ada1 (standard drive that comes in the Dell T310s we use) 8GB RAM Intel(R)...

I have recently installed a 300TB FreeNAS (11.2_U5). It is running on a 16-bay Supermicro and expanded to a 24-bay Supermicro JBOD via AOC-S3008L-L8E (which is basically an LSI 3008 HBA). The HDDs are Western Digital HGST 10TB (P/N: HUH721010ALE600) There are 2 x 10GbE RJ-45 ports on the...

FreeNAS 11.2-U1 Detect that when on remote system I start use attached iSCSI disk for write On FreeNAS system have start messaging about error disk (device: ATA error count increased ...) but cable checked, reattached, and errors on differ disk can be. If use SAMBA services, NOT HAVE any...

I searched and googled, but could not find a solved/answered situation like this. If I could, I would replace this disk, just not able to do that right now. It is a refurb WD Red 4TB that I have had running for about 1.3 years. I was not able to pull things off the prior disk in time and...

I am running Freenas 11.1-Stable. I have recently got alerts that both drives in my array seem to have an unusually high error count. I am new to this whole NAS thing and so my knowledge is very limited. Should I be concerned? What might be causing my errors? I have placed smartctl -a output...

Hi All, Wondering if someone can take a look at my smartctl out put below, Just had an email saying the error count has increased on my drive, not sure if its failing etc. Have ran the disk through Hard Disk Sentinel and that shows that the drive is perfect 100 health Thanks Steve...

Hello i've come across a issue after booting up FreeNAS (This also happened during installation) where it would come up with a Command Timeout Error, the attached image is what I get on screen! The system is rather dated to be honest but it does bootup the OS and the web panel is accessable...

Will be glad if someone could help, I have the couple of errors below suddenly start to appear on my freenas. Device: /dev/ada1, 20 Currently unreadable (pending) sectors Device: /dev/ada1, ATA error count increased from 86 to 88 I have tried the steps defined here -...