Hi All, I hope this is a straightforward matter to solve :) I run Freenas 9.10 (uprading makes me nervous but i know i need to do it) on a Dell Poweredge T20 intel box with 4 x 4TB internal SATA drives with the Freenas O/S runing on a USB stick. It has worked happily for year and i just have a...

Current PlexPass Version Installed = 1.13.9.5439 Current FreshPorts PlexPass Version Available = 1.15.1.791_1 Yes, I know I am on the new platform and should be migrating to IOCage but I'm not 100% comfortable doing so and can't afford a mis-step when it comes to the library of 20tb I've spent...

Has anyone had any success in installing Telly in a FreeNAS 9.10 Jail. I have created a standard jail and done the pkg update and upgrade. I have then fetched the telly-1.0.3.freebsd-amd64.tar.gz release from GitHub, but when I try to extract the executable using tar, i get and error message...

Hello all, and good morning! If this has been answered in a place that I could not find, please do NOT bit my head off. I looked for it before posting. Thanks We have been riding the 9.10 train for a long time as it is/was the stable tried and true branch. However I see that the last...

Is it ok to backup my 9.10 configuration and then erase the FlashDrive and then install 11.0 and restore the backup configuration? Is this a safe option as my mirrored FlashDrives are now too small and so I need to upgrade them to install 11.0, or will this cause problems. And clean up some mess...

Running: FreeNAS-9.10.2-U2 (e1497f2) I had 2 drives failed over the long weekend. I put in new drives, ran /usr/local/bin/midclt call notifier.multipath_sync. It returned "null". When I go to replace either failed disk I do not get multipath drives, only da. Any advice? Here is my zpool...

Hi everybody, I just installed iocage in a FreeNAS 9.10 jail. Haven't done anything with it so far, but wonder, if I can install iocage not in a jail, but in the root-system ? Does anybody have experience with that ? If that would work, could these iocage-jails also be (re)used in FreeNAS 11 ...

OK so I think I am doing something very wrong i have followed the instructions for this script and it is not seeming to work at all. i have already tried the guide on another plugin jail and a reinstalled plugin, the transmission plugin is working fine. If there is a better guide i should be...

Hi, I've put off long enough upgrading my 9.3. Should I go to 9.10 before Corral or jump straight to it? Thanks Matt.

Buongiorno a tutti! When I was on FreeNAS 9.10, before switching to CORRAL I had problem related to the shutdown from the specific button on the GUI, from the CRON task and from SSH and from the physical button on my case. When I had switched (to CORRAL) my problem was SOLVED... Now that I have...

Folks, Over the past week I’ve been asked by many of you (some on the forums, some through other means) what our intentions at iXsystems are around the existing FreeNAS product. We did have language in our initial Corral press release around this, but I wanted to take a moment to dispel any...

I'm trying to add a VM in ESXi to a NFS datastore on my FreeNAS 9.10. When I get to the options for thick/thin provisioning its all greyed out. Looked around found some information about quotas needing to be defined on FreeNAS NFS for thick provisioning. So I added the quota and tried again to...

Hallo zusammen, ich habe gestern mein erstes FreeNAS System aufgebaut und installiert. Bei der Einrichtung des Volumes habe ich erwartet zwischen verschiedenen Verschlüsselungsmethoden und Schlüssellängen wählen zu können. Verschiedenen Aussagen zufolge wird ein AES-256 Verschlüsselungssystem...

Hi! I installed FreeNAS 9.10 on a Proliant G8, on SSD drive connected to the SATA-ODD port. My problem is: - If booting up without connecting any drive other than the system drive FreeNAS runs as it should be. - If booting up with the drives for storage attached to the system, there is...

Buonasera a tutti! :) Is from 6 month that i can't create a Jail. Yesterday i have solved this problem but another one is comes out... If i try to install BASH i received: root@matlab_1:/ # pkg install bash Updating FreeBSD repository catalogue... FreeBSD repository is up-to-date. All...

Greetings all, I'm having a very difficult time getting my NFS shares to work with krb5p. Here is what my system looks like: Build: FreeNAS-9.10.1-U2 (f045a8b) CPU: Intel Xeon E3-1231 v3 RAM: 32GB DDR3 I've setup a RAID-Z2 on 4x Western Digital 6TB SATA drives for an effective 10.2TB of...

Basically I've just installed FreeNAS 9.10 on a physical server, but when I go to View Disks under Storage, it only shows me one of my six drives. Below I've given all the info possible and the things I've tried already, however there's not much else to say as the issue is pretty straightforward...

Hello, dear FreeNAS forum team. I had version 9.3 STABLE 201605170422 and updated it to the latest FreeNAS-9.10.1-U2 (f045a8b) version using GUI. Afterwards, I couldn't access my CIFS share. I found that if LDAP is enabled - I can't start CIFS service. I backed up my configuration and did a...

Hello. I was happily using Freenas 9.10. Then, last week, I noticed that I had some updates available. So, I applied them. Ever since then, I have not been able to boot. I get that same old familiar error "this is a nas data disk and cannot boot..." But WAIT! before you tune out and assume...